S-80934CLPF-G64TFG belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80934CLPF-G64TFG is available in a SOT-23-5 package, which consists of a small outline transistor with five pins. It is typically sold in reels or tubes containing a specific quantity, such as 3000 units per reel.
The specifications of S-80934CLPF-G64TFG include:
The pin configuration of S-80934CLPF-G64TFG is as follows:
The S-80934CLPF-G64TFG offers the following functional features:
The S-80934CLPF-G64TFG operates based on a voltage detection circuit that compares the input voltage with a reference voltage. When the input voltage falls below the detection threshold, the reset output is activated, indicating a low voltage condition. The manual reset input allows the user to manually trigger the reset function.
The S-80934CLPF-G64TFG can be applied in various electronic devices and systems, including:
Some alternative models similar to S-80934CLPF-G64TFG include:
These models offer similar voltage detection and reset functions, but may differ in package type, detection voltage range, or other specifications.
Word count: 443 words
Sure! Here are 10 common questions and answers related to the application of S-80934CLPF-G64TFG in technical solutions:
Q: What is the S-80934CLPF-G64TFG? A: The S-80934CLPF-G64TFG is a specific model of voltage detector IC (integrated circuit) manufactured by a company called Seiko Instruments.
Q: What is the purpose of the S-80934CLPF-G64TFG? A: The purpose of this voltage detector IC is to monitor the voltage level of a power supply and provide an output signal when the voltage exceeds or falls below a certain threshold.
Q: What are the typical applications of the S-80934CLPF-G64TFG? A: This IC is commonly used in various technical solutions such as battery-powered devices, power management systems, automotive electronics, and industrial control systems.
Q: What is the operating voltage range of the S-80934CLPF-G64TFG? A: The operating voltage range of this IC is typically between 1.6V and 6.0V.
Q: How accurate is the voltage detection of the S-80934CLPF-G64TFG? A: The voltage detection accuracy of this IC is typically within ±1.0%.
Q: Does the S-80934CLPF-G64TFG have any built-in delay time for voltage detection? A: Yes, it has a built-in delay time of approximately 200ms to prevent false detections caused by voltage fluctuations.
Q: Can the S-80934CLPF-G64TFG be used in both positive and negative voltage detection? A: No, this IC is designed specifically for positive voltage detection only.
Q: What is the output configuration of the S-80934CLPF-G64TFG? A: The output configuration is an open-drain type, which requires an external pull-up resistor to provide a logic-level signal.
Q: Is the S-80934CLPF-G64TFG available in different package types? A: Yes, this IC is available in various package types, including SOT-23-5 and SC-82AB.
Q: Where can I find more detailed information about the S-80934CLPF-G64TFG? A: You can refer to the datasheet provided by Seiko Instruments or visit their official website for comprehensive technical information about this IC.
Please note that the answers provided here are general and may vary depending on the specific requirements and specifications of your technical solution.