ST16C1551IJ28-F

Product Overview

Category

The ST16C1551IJ28-F belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for serial communication applications, specifically in asynchronous and synchronous data transmission.

Characteristics

• High-speed data transfer capability
• Low power consumption
• Wide operating voltage range
• Multiple data formats supported
• Built-in error detection and correction mechanisms

Package

The ST16C1551IJ28-F is available in a 28-pin plastic dual in-line package (PDIP).

Essence

The essence of this product lies in its ability to facilitate reliable and efficient serial communication between devices.

Packaging/Quantity

The ST16C1551IJ28-F is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

• Supply Voltage: 3.3V
• Data Rate: Up to 5 Mbps
• Operating Temperature Range: -40°C to +85°C
• Number of Channels: 1
• Interface Type: UART (Universal Asynchronous Receiver Transmitter)
• Package Type: PDIP-28

Detailed Pin Configuration

Pin | Name | Function --- | ---- | -------- 1 | VCC | Power Supply 2 | GND | Ground 3 | TXD | Transmit Data 4 | RXD | Receive Data 5 | CTS | Clear To Send 6 | RTS | Request To Send 7 | INT | Interrupt Output 8 | CLK | Clock Input 9 | ... | ...

(Note: Detailed pin configuration beyond pin 9 is not provided here due to space limitations.)

Functional Features

• Full-duplex operation
• Programmable baud rate generator
• Automatic hardware flow control
• Programmable FIFO (First-In, First-Out) buffers
• Support for modem control signals

Advantages and Disadvantages

Advantages

• High-speed data transfer capability enables efficient communication.
• Low power consumption makes it suitable for battery-powered devices.
• Wide operating voltage range allows compatibility with various systems.
• Built-in error detection and correction mechanisms enhance data reliability.

Disadvantages

• Limited number of channels (only 1 channel).
• PDIP package may not be suitable for space-constrained applications.

Working Principles

The ST16C1551IJ28-F operates based on the principles of UART communication. It receives and transmits data in a serial format, converting parallel data into a serial stream for transmission and vice versa. The IC incorporates various features such as baud rate generation, flow control, and buffering to ensure reliable and efficient data transfer.

Detailed Application Field Plans

The ST16C1551IJ28-F finds application in various fields, including: 1. Industrial automation: Used for communication between PLCs (Programmable Logic Controllers) and other industrial devices. 2. Telecommunications: Facilitates data transmission in telecommunication networks. 3. Consumer electronics: Enables serial communication in devices such as set-top boxes, gaming consoles, and home automation systems. 4. Medical devices: Used for data exchange between medical equipment and monitoring systems. 5. Automotive: Supports communication between different automotive modules and sensors.

Detailed and Complete Alternative Models

1. ST16C1550IJ28-F: Similar to ST16C1551IJ28-F, but with two channels instead of one.
2. ST16C1552IJ28-F: Similar to ST16C1551IJ28-F, but with additional features like DMA (Direct Memory Access) support.
3. MAX3100EEET+: UART IC with similar functionality, available in a smaller package (TDFN-16).

(Note: The list of alternative models provided here is not exhaustive.)

In conclusion, the ST16C1551IJ28-F is a versatile IC designed for serial communication applications. Its high-speed data transfer capability, low power consumption, and built-in error detection mechanisms make it suitable for various industries. However, its limited number of channels and PDIP package may pose limitations in certain scenarios.