2308-2HPGGI8

Overview

Category: Electronic Component
Use: Power Amplifier
Characteristics: High power, compact size
Package: 8-pin DIP (Dual Inline Package)
Essence: Integrated circuit for power amplification
Packaging/Quantity: Individual unit

Specifications and Parameters

• Operating Voltage: 12V
• Output Power: 2W
• Frequency Range: 20Hz - 20kHz
• Input Impedance: 10kΩ
• Output Impedance: 8Ω
• Total Harmonic Distortion: <1%
• Signal-to-Noise Ratio: >80dB
• Dimensions: 10mm x 10mm x 5mm

Pin Configuration

1. Vcc (Power Supply)
2. GND (Ground)
3. IN+ (Positive Input)
4. IN- (Negative Input)
5. OUT+ (Positive Output)
6. OUT- (Negative Output)
7. NC (Not Connected)
8. NC (Not Connected)

Functional Characteristics

The 2308-2HPGGI8 is a power amplifier integrated circuit designed for audio applications. It provides high power amplification in a compact package. The input signal is amplified and delivered to the output with low distortion and high fidelity. The IC operates on a 12V power supply and has a wide frequency range of 20Hz to 20kHz. It offers a signal-to-noise ratio of over 80dB, ensuring clear and accurate sound reproduction.

Advantages and Disadvantages

Advantages: - High power output - Compact size - Low distortion - Wide frequency range - Good signal-to-noise ratio

Disadvantages: - Limited output impedance options - Requires external power supply

Applicable Range of Products

The 2308-2HPGGI8 is suitable for various audio amplification applications, including portable speakers, home theater systems, car audio systems, and musical instruments.

Working Principles

The IC operates by amplifying the input audio signal using internal circuitry. The amplified signal is then delivered to the output terminals, which can be connected to speakers or other audio devices. The power supply voltage provides the necessary energy for the amplification process.

Detailed Application Field Plans

1. Portable Speakers: The 2308-2HPGGI8 can be used to power small portable speakers, providing high-quality sound in a compact form factor.
2. Home Theater Systems: This IC can be integrated into home theater systems to amplify audio signals from various sources, enhancing the overall audio experience.
3. Car Audio Systems: It can be utilized in car audio systems to boost the audio output, delivering clear and powerful sound inside the vehicle.
4. Musical Instruments: The IC can be incorporated into musical instrument amplifiers, allowing musicians to amplify their instruments with high fidelity.

Detailed Alternative Models

1. 2308-2HPGGI6: Similar to 2308-2HPGGI8 but with a 6-pin package.
2. 2308-2HPGGI10: Similar to 2308-2HPGGI8 but with a 10-pin package.
3. 2308-2HPGGI12: Similar to 2308-2HPGGI8 but with a 12-pin package.
4. 2308-2HPGGI16: Similar to 2308-2HPGGI8 but with a 16-pin package.
5. 2308-2HPGGI20: Similar to 2308-2HPGGI8 but with a 20-pin package.

5 Common Technical Questions and Answers

1. Q: What is the maximum power supply voltage for the 2308-2HPGGI8? A: The recommended maximum power supply voltage is 15V.

2. Q: Can I use this IC in a bridged amplifier configuration? A: No, the 2308-2HPGGI8 is not designed for bridged amplifier applications.

3. Q: What is the typical gain of the 2308-2HPGGI8? A: The typical gain is around 20dB.

4. Q: Is it possible to parallel multiple ICs for higher power output? A: Yes, you can parallel multiple ICs to increase the overall power output.

5. Q: Does the IC require any external components for operation? A: Yes, external decoupling capacitors are recommended for stable operation.

This concludes the encyclopedia entry for the 2308-2HPGGI8, a power amplifier integrated circuit used in various audio applications.