CS82C54-10Z96

Product Overview

Category

The CS82C54-10Z96 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for various applications, including timing and control functions.

Characteristics

• Package: The CS82C54-10Z96 is available in a 40-pin plastic dual in-line package (PDIP).
• Essence: This IC is designed to provide precise timing and control capabilities.
• Packaging/Quantity: The CS82C54-10Z96 is typically sold in reels or tubes, with a quantity of 25 units per package.

Specifications

The specifications of the CS82C54-10Z96 are as follows:

• Supply Voltage: 5V ± 10%
• Operating Temperature Range: -40°C to +85°C
• Clock Frequency: Up to 10 MHz
• Number of Timers/Counters: 3
• Timer/Counter Modes: Programmable in various modes
• Output/Input Configuration: TTL-compatible

Detailed Pin Configuration

The CS82C54-10Z96 has a total of 40 pins. The pin configuration is as follows:

1. GND (Ground)
2. CLK0 (Clock Input 0)
3. OUT0 (Output 0)
4. GND (Ground)
5. CLK1 (Clock Input 1)
6. OUT1 (Output 1)
7. GND (Ground)
8. CLK2 (Clock Input 2)
9. OUT2 (Output 2)
10. GND (Ground)
11. A0 (Address Input 0)
12. A1 (Address Input 1)
13. A2 (Address Input 2)
14. A3 (Address Input 3)
15. A4 (Address Input 4)
16. A5 (Address Input 5)
17. A6 (Address Input 6)
18. A7 (Address Input 7)
19. RD (Read Input)
20. WR (Write Input)
21. CS (Chip Select Input)
22. RESET (Reset Input)
23. INT (Interrupt Output)
24. GND (Ground)
25. D0 (Data Bus Bit 0)
26. D1 (Data Bus Bit 1)
27. D2 (Data Bus Bit 2)
28. D3 (Data Bus Bit 3)
29. D4 (Data Bus Bit 4)
30. D5 (Data Bus Bit 5)
31. D6 (Data Bus Bit 6)
32. D7 (Data Bus Bit 7)
33. VCC (+5V Power Supply)
34. NC (No Connection)
35. NC (No Connection)
36. NC (No Connection)
37. NC (No Connection)
38. NC (No Connection)
39. NC (No Connection)
40. NC (No Connection)

Functional Features

The CS82C54-10Z96 offers the following functional features:

• Programmable Timer/Counter Modes: The IC allows users to configure the timers/counters in various modes, such as event counting, frequency measurement, and pulse width modulation.
• Interrupt Capability: It supports interrupt generation based on specific events or timer overflow conditions.
• Clock Input Options: The CS82C54-10Z96 can accept clock inputs from external sources or generate its own clock using an internal oscillator.
• Output Control: The IC provides control over the output signals, allowing users to enable/disable outputs and select different output modes.

Advantages and Disadvantages

Advantages

• Versatile Timing and Control: The CS82C54-10Z96 offers flexible timing and control capabilities, making it suitable for a wide range of applications.
• Programmable Modes: The ability to program the timers/counters in different modes provides customization options based on specific requirements.
• Reliable Performance: This IC is known for its reliable performance and accuracy.

Disadvantages

• Limited Number of Timers/Counters: The CS82C54-10Z96 has three timers/counters, which may be insufficient for complex applications requiring more simultaneous timing functions.
• Power Consumption: As with most integrated circuits, power consumption should be considered, especially in battery-powered devices.

Working Principles

The CS82C54-10Z96 operates based on the principles of digital logic and timing control. It utilizes internal registers, counters, and control logic to perform various timing and counting functions. The IC receives clock inputs, processes them according to the programmed mode, and generates output signals accordingly. Interrupts can be triggered based on specific events or timer overflow conditions.

Detailed Application Field Plans

The CS82C54-10Z96 finds applications in various fields, including:

1. Industrial Automation: Used for precise timing and control in industrial automation systems, such as PLC