รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
ISL6608CB-T

ISL6608CB-T

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - High efficiency - Low power consumption - Wide input voltage range - Adjustable output voltage - Overcurrent protection - Thermal shutdown protection

Package: CB (Ceramic BGA)

Essence: The ISL6608CB-T is a voltage regulator IC designed for various applications that require stable and regulated power supply.

Packaging/Quantity: The ISL6608CB-T is available in a ceramic BGA package and is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 3A
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL6608CB-T has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback Voltage
  4. EN: Enable Pin
  5. SS: Soft-Start Pin
  6. PG: Power Good Indicator
  7. VOUT: Output Voltage
  8. SW: Switching Node

Functional Features

  • High Efficiency: The ISL6608CB-T utilizes advanced switching techniques to achieve high efficiency, minimizing power loss.
  • Low Power Consumption: The quiescent current of 50µA ensures low power consumption during standby or idle mode.
  • Wide Input Voltage Range: The IC can operate within a wide input voltage range of 2.7V to 5.5V, making it suitable for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted from 0.6V to the input voltage (VIN) to meet specific requirements.
  • Overcurrent Protection: The IC incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
  • Thermal Shutdown Protection: In case of excessive temperature, the thermal shutdown feature activates, preventing damage to the IC.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Wide input voltage range allows for versatile applications - Adjustable output voltage provides flexibility - Overcurrent and thermal shutdown protection enhance reliability

Disadvantages: - Limited maximum output current of 3A may not be suitable for high-power applications - Ceramic BGA package may require specialized handling during assembly

Working Principles

The ISL6608CB-T operates as a synchronous buck converter, converting a higher input voltage to a lower output voltage with high efficiency. It utilizes pulse-width modulation (PWM) techniques to control the switching of the internal power MOSFETs. By adjusting the duty cycle of the PWM signal, the output voltage can be regulated.

Detailed Application Field Plans

The ISL6608CB-T is commonly used in various electronic devices and systems that require stable and regulated power supply, such as: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

  • ISL6608IB-T
  • ISL6608IRZ-T
  • ISL6608CRZ-T
  • ISL6608CBZ-T
  • ISL6608EVAL1Z (Evaluation Board)

These alternative models offer similar functionality and characteristics to the ISL6608CB-T and can be considered as alternatives based on specific application requirements.

Word count: 410

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ ISL6608CB-T ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of ISL6608CB-T in technical solutions:

  1. Q: What is ISL6608CB-T? A: ISL6608CB-T is a high-performance synchronous buck controller IC used for voltage regulation in various technical applications.

  2. Q: What is the input voltage range supported by ISL6608CB-T? A: The input voltage range supported by ISL6608CB-T is typically between 4.5V and 24V.

  3. Q: What is the output voltage range that can be achieved using ISL6608CB-T? A: The output voltage range achievable with ISL6608CB-T depends on the external components used, but it can typically range from 0.6V to 5.5V.

  4. Q: What is the maximum output current that ISL6608CB-T can handle? A: ISL6608CB-T can handle a maximum output current of up to 25A, depending on the thermal design and external components used.

  5. Q: Can ISL6608CB-T operate in a synchronous rectification mode? A: Yes, ISL6608CB-T supports synchronous rectification, which improves efficiency by reducing power losses.

  6. Q: Does ISL6608CB-T have any built-in protection features? A: Yes, ISL6608CB-T includes various protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  7. Q: Can ISL6608CB-T be used in automotive applications? A: Yes, ISL6608CB-T is suitable for automotive applications as it meets the necessary requirements for automotive-grade components.

  8. Q: What is the typical switching frequency of ISL6608CB-T? A: The typical switching frequency of ISL6608CB-T is around 300kHz, but it can be adjusted using external components.

  9. Q: Can ISL6608CB-T be used in a multi-phase configuration? A: Yes, ISL6608CB-T can be used in a multi-phase configuration to achieve higher output power and improve load sharing.

  10. Q: What are the recommended external components for designing with ISL6608CB-T? A: The recommended external components include inductors, capacitors, and MOSFETs suitable for the desired application and operating conditions.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.