IXFN64N50PD2
Product Overview
Category
The IXFN64N50PD2 belongs to the category of power MOSFETs.
Use
It is commonly used in power electronics applications such as motor control, power supplies, and inverters.
Characteristics
- High voltage capability
- Low on-resistance
- Fast switching speed
- High reliability
Package
The IXFN64N50PD2 is typically available in a TO-268 package.
Essence
This power MOSFET is essential for efficient power management and control in various electronic systems.
Packaging/Quantity
It is usually packaged in reels or tubes and is available in varying quantities depending on the supplier.
Specifications
- Voltage Rating: 500V
- Current Rating: 64A
- On-Resistance: 0.085Ω
- Gate Charge: 110nC
- Operating Temperature: -55°C to 150°C
Detailed Pin Configuration
The IXFN64N50PD2 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- Low conduction losses
- High efficiency
- Enhanced thermal performance
- Robustness against overcurrent and overvoltage conditions
Advantages and Disadvantages
Advantages
- High voltage capability
- Low on-resistance leading to reduced power dissipation
- Fast switching speed for improved efficiency
Disadvantages
- Higher cost compared to standard MOSFETs
- Requires careful handling due to its high voltage rating
Working Principles
The IXFN64N50PD2 operates based on the principles of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals. By modulating the gate voltage, the MOSFET can efficiently regulate power flow in electronic circuits.
Detailed Application Field Plans
The IXFN64N50PD2 is widely used in the following applications: - Motor drives - Uninterruptible power supplies (UPS) - Solar inverters - Switch-mode power supplies
Detailed and Complete Alternative Models
Some alternative models to the IXFN64N50PD2 include: - IRFP4568PbF - FDPF51N25T - STW45NM50FD
In conclusion, the IXFN64N50PD2 is a high-performance power MOSFET with excellent characteristics suitable for demanding power electronics applications. Its high voltage capability, low on-resistance, and fast switching speed make it an ideal choice for efficient power management and control.
[Word count: 366]
แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ IXFN64N50PD2 ในโซลูชันทางเทคนิค
What is IXFN64N50PD2?
- IXFN64N50PD2 is a high power MOSFET designed for various technical solutions requiring efficient power management.
What is the maximum voltage and current rating of IXFN64N50PD2?
- The maximum voltage rating is 500V, and the maximum current rating is 64A.
What are the typical applications of IXFN64N50PD2?
- It is commonly used in applications such as motor control, power supplies, inverters, and welding equipment.
What are the key features of IXFN64N50PD2?
- Some key features include low on-state resistance, fast switching speed, and high input impedance.
What is the thermal resistance of IXFN64N50PD2?
- The thermal resistance is typically around 0.35°C/W.
Is IXFN64N50PD2 suitable for high-frequency applications?
- Yes, it is suitable for high-frequency applications due to its fast switching speed.
Does IXFN64N50PD2 require a heat sink for operation?
- It is recommended to use a heat sink to ensure optimal thermal performance, especially in high-power applications.
What are the important parameters to consider when designing with IXFN64N50PD2?
- Key parameters to consider include gate voltage, drain-source voltage, and continuous drain current.
Can IXFN64N50PD2 be used in automotive applications?
- Yes, it can be used in automotive applications, provided it meets the specific requirements and standards for automotive electronics.
Where can I find detailed technical specifications and application notes for IXFN64N50PD2?
- Detailed technical specifications and application notes can be found in the product datasheet provided by the manufacturer or distributor.