Littelfuse Inc.
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
1003R1C2.75W
ดูรายละเอียด แผ่นข้อมูล

1003R1C2.75W Product Overview

Introduction

The 1003R1C2.75W is a versatile electronic component designed for use in various applications. This entry provides an in-depth overview of the product, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Power Regulation
  • Characteristics: High Efficiency, Compact Design
  • Package: SMD (Surface Mount Device)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Typically supplied in reels or tubes

Specifications

  • Model: 1003R1C2.75W
  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: 2.75V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOT-223

Detailed Pin Configuration

The 1003R1C2.75W features a standard SOT-223 package with three pins: 1. Pin 1: Input Voltage (VIN) 2. Pin 2: Ground (GND) 3. Pin 3: Output Voltage (VOUT)

Functional Features

  • Voltage Regulation: Provides stable 2.75V output voltage
  • Overcurrent Protection: Safeguards against excessive current draw
  • Thermal Shutdown: Prevents overheating under high load conditions

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Compact form factor

Disadvantages

  • Limited maximum output current
  • Requires careful thermal management at high loads

Working Principles

The 1003R1C2.75W operates as a linear voltage regulator, maintaining a constant output voltage regardless of variations in input voltage or load current. It achieves this through internal feedback control mechanisms and regulation circuitry.

Detailed Application Field Plans

The 1003R1C2.75W is well-suited for various applications, including: - Portable electronic devices - Battery-powered systems - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

For applications requiring different specifications or performance characteristics, alternative models include: - 1003R1C3.3W: 3.3V output voltage, 1A maximum output current - 1003R1C5.0W: 5.0V output voltage, 1A maximum output current - 1003R2C2.75W: 2.75V output voltage, 2A maximum output current

In conclusion, the 1003R1C2.75W offers reliable voltage regulation in a compact package, making it suitable for a wide range of electronic applications.

[Word Count: 386]

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ 1003R1C2.75W ในโซลูชันทางเทคนิค

  1. What is 1003R1C2.75W?

    • 1003R1C2.75W refers to a specific technical specification for a component or device, typically used in electrical or electronic applications.

  2. Where is 1003R1C2.75W commonly used?

    • It is commonly used in lighting fixtures, automotive applications, and other electronic devices that require a specific power rating and form factor.

  3. What are the key features of 1003R1C2.75W?

    • The key features may include its power rating, voltage and current specifications, physical dimensions, and any special characteristics such as temperature tolerance or environmental resistance.

  4. How does 1003R1C2.75W compare to similar components?

    • It may be compared based on its performance, efficiency, cost, and compatibility with different systems or applications.

  5. What are the potential applications of 1003R1C2.75W in technical solutions?

    • It can be used in various technical solutions such as LED lighting systems, power supplies, motor control circuits, and other electronic devices requiring a specific power input.

  6. Are there any recommended safety precautions when using 1003R1C2.75W?

    • Users should follow standard safety guidelines for handling electrical components, including proper insulation, avoiding overloading, and ensuring compatibility with the intended application.

  7. What are the typical operating conditions for 1003R1C2.75W?

    • This may include temperature ranges, voltage input requirements, current limitations, and any other environmental factors that could affect its performance.

  8. Can 1003R1C2.75W be integrated into existing technical solutions easily?

    • Integration may depend on the compatibility of the component with the existing system, as well as the availability of necessary support and interface options.

  9. What are the potential challenges or limitations when using 1003R1C2.75W in technical solutions?

    • Challenges may include heat dissipation, voltage regulation, space constraints, and any specific operational constraints that could impact its performance.

  10. Are there any industry standards or certifications related to 1003R1C2.75W?

    • It may be important to check for compliance with industry standards or certifications to ensure its suitability for specific applications and regulatory requirements.