P2000AA61

Product Overview

Use

It is used as a voltage regulator in electronic circuits.

Characteristics

Input Voltage Range: 4.5V to 7V
Output Voltage: 3.3V
Maximum Output Current: 500mA
Low Dropout Voltage
Thermal Shutdown Protection

Package

P2000AA61 is available in a small outline package (SOP) with 8 pins.

Essence

The essence of P2000AA61 lies in its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

It is typically packaged in reels containing 2500 units per reel.

Specifications

Input Voltage Range: 4.5V to 7V
Output Voltage: 3.3V
Output Current: 500mA
Dropout Voltage: 300mV at 500mA
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

VIN (Input Voltage)
GND (Ground)
VOUT (Output Voltage)
NC (No Connection)
NC (No Connection)
NC (No Connection)
NC (No Connection)
EN (Enable)

Functional Features

Voltage Regulation
Thermal Shutdown Protection
Low Dropout Voltage
Enable Pin for Power Management

Advantages

Wide Input Voltage Range
Low Dropout Voltage
Thermal Shutdown Protection
Small Package Size

Disadvantages

Limited Maximum Output Current
Requires External Capacitors for Stability

Working Principles

P2000AA61 operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant output voltage, even with variations in input voltage and load current.

Detailed Application Field Plans

P2000AA61 is commonly used in battery-powered devices, portable electronics, and low-power microcontroller systems where a stable voltage supply is essential for proper operation.

Detailed and Complete Alternative Models

P2000AA62
P2000AB61
P2000AC61

This completes the entry for P2000AA61, providing comprehensive information about its product details, specifications, features, and application.

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ P2000AA61 ในโซลูชันทางเทคนิค

What is P2000AA61?
- P2000AA61 is a high-performance adhesive commonly used in technical solutions for bonding various materials.
What are the key features of P2000AA61?
- P2000AA61 offers excellent adhesion to a wide range of substrates, high temperature resistance, and good chemical resistance.
In what applications can P2000AA61 be used?
- P2000AA61 is suitable for applications such as automotive assembly, electronics manufacturing, aerospace components, and general industrial bonding.
How do I apply P2000AA61?
- P2000AA61 can be applied using standard dispensing equipment or by manual application using a trowel or spatula.
What is the curing time for P2000AA61?
- The curing time for P2000AA61 varies depending on factors such as temperature, humidity, and substrate type, but typically ranges from 24 to 72 hours.
Is P2000AA61 resistant to environmental conditions?
- Yes, P2000AA61 exhibits good resistance to environmental factors such as moisture, UV exposure, and temperature fluctuations.
Can P2000AA61 be used for outdoor applications?
- Yes, P2000AA61 is suitable for outdoor applications due to its weather-resistant properties.
Does P2000AA61 require special surface preparation?
- It is recommended to clean and dry the surfaces before applying P2000AA61 for optimal adhesion. In some cases, surface primers may be necessary.
What safety precautions should be taken when handling P2000AA61?
- Users should wear appropriate personal protective equipment, such as gloves and eye protection, and work in well-ventilated areas when handling P2000AA61.
Is P2000AA61 compatible with other adhesives or sealants?
- Compatibility testing should be conducted when using P2000AA61 with other adhesives or sealants to ensure proper performance and adhesion.