V480LS80CPX10
Introduction
The V480LS80CPX10 is a surge protection component designed for use in electronic devices to protect against voltage surges and transients. This entry provides an overview of the product, including its category, use, characteristics, packaging, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Surge Protection Component
- Use: Protecting electronic devices from voltage surges and transients
- Characteristics: High surge current capability, low clamping voltage, fast response time
- Package: SMD (Surface Mount Device)
- Essence: Provides transient voltage suppression for sensitive electronics
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Part Number: V480LS80CPX10
- Peak Pulse Power: 480W
- Clamping Voltage: 77.4V
- Operating Temperature Range: -55°C to +150°C
- Breakdown Voltage: 85.3V
- Maximum Surge Current: 10kA
Detailed Pin Configuration
The V480LS80CPX10 has a standard SMD package with two terminals. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode
Functional Features
- Transient Voltage Suppression: Provides protection by diverting excessive current away from sensitive components
- Fast Response Time: Reacts quickly to voltage surges, minimizing potential damage to connected devices
- High Surge Current Capability: Can handle large surge currents without degradation
Advantages and Disadvantages
Advantages
- Effective protection against voltage surges
- Fast response time
- High surge current capability
Disadvantages
- Clamping voltage may be relatively high for some applications
- Sensitive to reverse polarity connection
Working Principles
The V480LS80CPX10 operates based on the principle of avalanche breakdown. When a voltage surge occurs, the component conducts excess current to the ground, preventing it from reaching the protected device. This action effectively limits the voltage across the protected circuit.
Detailed Application Field Plans
The V480LS80CPX10 is commonly used in various electronic devices, including: - Power supplies - Telecommunication equipment - Industrial control systems - Consumer electronics
Detailed and Complete Alternative Models
- Alternative Model 1: V130LA20CPX10
- Peak Pulse Power: 130W
- Clamping Voltage: 209V
- Package: SMD
- Alternative Model 2: V275LA40CPX10
- Peak Pulse Power: 275W
- Clamping Voltage: 710V
- Package: SMD
In summary, the V480LS80CPX10 is a surge protection component with high surge current capability, low clamping voltage, and fast response time. It is widely used in various electronic devices to safeguard against voltage surges and transients.
Word Count: 448
แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ V480LS80CPX10 ในโซลูชันทางเทคนิค
What is V480LS80CPX10?
- V480LS80CPX10 is a type of varistor, also known as a voltage-dependent resistor, used to protect electronic circuits from overvoltage conditions.
How does V480LS80CPX10 work?
- V480LS80CPX10 operates by changing its resistance in response to the applied voltage, effectively diverting excess current away from sensitive components.
What are the typical applications of V480LS80CPX10?
- V480LS80CPX10 is commonly used in surge protection devices, power supplies, telecommunications equipment, and industrial control systems.
What is the maximum voltage rating of V480LS80CPX10?
- The maximum voltage rating of V480LS80CPX10 is 480V, making it suitable for protecting against moderate to high voltage surges.
What is the energy absorption capability of V480LS80CPX10?
- V480LS80CPX10 has a high energy absorption capability, allowing it to dissipate significant amounts of energy during transient events.
Is V480LS80CPX10 suitable for outdoor use?
- Yes, V480LS80CPX10 is designed to withstand outdoor environmental conditions and is often used in outdoor electrical and electronic systems.
Can V480LS80CPX10 be used in automotive applications?
- Yes, V480LS80CPX10 can be employed in automotive electronics to protect against voltage spikes and transients.
What are the temperature specifications for V480LS80CPX10?
- V480LS80CPX10 typically operates within a temperature range of -40°C to 85°C, ensuring reliable performance in various environments.
Does V480LS80CPX10 require any additional protective measures?
- In most cases, V480LS80CPX10 does not require additional protective measures, but proper circuit design and layout considerations are important for optimal performance.
Are there any alternatives to V480LS80CPX10 for surge protection?
- Yes, there are other varistors and transient voltage suppressors available, but V480LS80CPX10 is chosen for its specific voltage and energy absorption characteristics in technical solutions.