Macronix
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
MX25R1635FBDIH0
ดูรายละเอียด แผ่นข้อมูล

MX25R1635FBDIH0

Product Overview

Category

The MX25R1635FBDIH0 belongs to the category of serial NOR Flash memory.

Use

It is used for storing program code and data in various electronic devices such as smartphones, tablets, IoT devices, automotive systems, and industrial applications.

Characteristics

  • High-speed read operations
  • Low power consumption
  • Wide operating voltage range
  • Small package size
  • High reliability and endurance

Package

The MX25R1635FBDIH0 is available in a compact package, typically offered in surface mount technology (SMT) packages.

Essence

The essence of MX25R1635FBDIH0 lies in its ability to provide non-volatile storage for critical system software and data.

Packaging/Quantity

The MX25R1635FBDIH0 is commonly packaged in tape and reel format, with varying quantities based on customer requirements.

Specifications

  • Capacity: 16Mb
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature: -40°C to 85°C
  • Data Retention: Up to 20 years
  • Erase/Program Cycle Endurance: 100,000 cycles

Detailed Pin Configuration

The MX25R1635FBDIH0 features a standard 8-pin configuration: 1. Chip Select (/CS) 2. Serial Clock (SCLK) 3. Serial Data Input/Output (IO) 4. Ground (GND) 5. Not Connected (NC) 6. Supply Voltage (VCC) 7. Hold (/HOLD) 8. Write Protect (/WP)

Functional Features

  • Fast Read Speed: Enables quick access to stored data
  • Flexible Erase and Program Operations: Supports efficient data management
  • Security Features: Provides hardware-based protection of sensitive information
  • Low Power Consumption: Ideal for battery-powered devices

Advantages and Disadvantages

Advantages

  • High-speed read operations enhance overall system performance
  • Low power consumption prolongs battery life in portable devices
  • Security features ensure data integrity and confidentiality

Disadvantages

  • Limited capacity compared to other storage solutions
  • Relatively higher cost per bit compared to larger capacity memories

Working Principles

The MX25R1635FBDIH0 operates by using the SPI interface to communicate with the host microcontroller. It stores data in non-volatile memory cells, allowing for reliable and persistent storage of critical information.

Detailed Application Field Plans

The MX25R1635FBDIH0 is well-suited for a wide range of applications, including: - Firmware storage in consumer electronics - Configuration storage in networking equipment - Code storage in automotive systems - Data logging in industrial automation

Detailed and Complete Alternative Models

Some alternative models to MX25R1635FBDIH0 include: - Winbond W25Q16JVSSIM - Micron N25Q016A13EF840E - Macronix MX25L1606EMI-12G

In conclusion, the MX25R1635FBDIH0 offers a balance of speed, reliability, and low power consumption, making it an ideal choice for various embedded systems and electronic devices.

Word Count: 489

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ MX25R1635FBDIH0 ในโซลูชันทางเทคนิค

  1. What is the MX25R1635FBDIH0?

    • The MX25R1635FBDIH0 is a 16Mb serial NOR flash memory chip commonly used in embedded systems and IoT devices.

  2. What are the key features of the MX25R1635FBDIH0?

    • The key features include a high-speed SPI interface, low power consumption, wide voltage range operation, and a small form factor.

  3. What are the typical applications for the MX25R1635FBDIH0?

    • Typical applications include firmware storage, boot code storage, parameter storage, and data logging in various electronic devices.

  4. What is the operating voltage range of the MX25R1635FBDIH0?

    • The operating voltage range is from 2.7V to 3.6V, making it suitable for a wide range of applications.

  5. What is the maximum clock frequency supported by the MX25R1635FBDIH0?

    • The MX25R1635FBDIH0 supports a maximum clock frequency of 133MHz, enabling high-speed data transfer.

  6. Does the MX25R1635FBDIH0 support over-the-air (OTA) updates?

    • Yes, the MX25R1635FBDIH0 can be used to store firmware and software updates for OTA updates in IoT devices.

  7. What is the typical write endurance of the MX25R1635FBDIH0?

    • The typical write endurance is specified at 100,000 program/erase cycles, ensuring reliable long-term data storage.

  8. Is the MX25R1635FBDIH0 compatible with industrial temperature ranges?

    • Yes, the MX25R1635FBDIH0 is designed to operate reliably within industrial temperature ranges, making it suitable for harsh environments.

  9. Can the MX25R1635FBDIH0 be used in battery-powered devices?

    • Yes, the low power consumption of the MX25R1635FBDIH0 makes it well-suited for use in battery-powered devices, helping to extend battery life.

  10. Are there any known compatibility issues with microcontrollers when using the MX25R1635FBDIH0?

    • The MX25R1635FBDIH0 is widely compatible with various microcontrollers that support SPI interface, and there are no known major compatibility issues reported.