Maxim Integrated
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
DS1013S-75
ดูรายละเอียด แผ่นข้อมูล

DS1013S-75

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-252
Essence: Linear regulator with adjustable output voltage
Packaging/Quantity: Tape and Reel / 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 20V
  • Output Voltage Range: 1.25V to 18V
  • Dropout Voltage: 0.75V (typical)
  • Output Current: 1A
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.4% (typical)
  • Quiescent Current: 80µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The DS1013S-75 has three pins:

  1. VIN (Pin 1): Input voltage pin.
  2. GND (Pin 2): Ground reference pin.
  3. VOUT (Pin 3): Output voltage pin.

Functional Features

  • Adjustable output voltage through external resistors.
  • Low dropout voltage enables efficient regulation even with small input-output differentials.
  • Excellent line and load regulation ensures stable output voltage under varying conditions.
  • Thermal shutdown protection prevents damage due to excessive temperature.
  • Short-circuit current limiting protects the device from overcurrent conditions.

Advantages and Disadvantages

Advantages: - High efficiency operation. - Wide input voltage range. - Adjustable output voltage. - Compact TO-252 package. - Thermal shutdown protection.

Disadvantages: - Limited output current capacity. - Dropout voltage may affect performance in low input-output differential applications.

Working Principles

The DS1013S-75 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with a fraction of the output voltage, adjusting the pass transistor accordingly to maintain a stable output voltage. The adjustable output voltage feature allows flexibility in various applications.

Detailed Application Field Plans

The DS1013S-75 is commonly used in the following applications:

  1. Battery-powered devices: Provides regulated voltage for microcontrollers, sensors, and other low-power components.
  2. Automotive electronics: Ensures stable voltage supply for various automotive systems, such as infotainment systems and lighting modules.
  3. Industrial equipment: Used in control circuits, motor drivers, and power management modules.
  4. Communication systems: Regulates voltage for RF modules, base stations, and wireless communication devices.

Detailed and Complete Alternative Models

  1. LM317: Adjustable positive voltage regulator with similar specifications.
  2. LT1085: Low dropout positive voltage regulator with higher output current capability.
  3. LM1117: Fixed output voltage regulator available in various voltage options.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 346 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ DS1013S-75 ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of DS1013S-75 in technical solutions:

  1. Q: What is DS1013S-75? A: DS1013S-75 is a specific model or component used in technical solutions, typically referring to a specific product or device.

  2. Q: What are the key features of DS1013S-75? A: The key features of DS1013S-75 may include high performance, reliability, compact size, low power consumption, and compatibility with various systems.

  3. Q: In which technical solutions can DS1013S-75 be used? A: DS1013S-75 can be used in a wide range of technical solutions such as robotics, automation, industrial control systems, IoT devices, and embedded systems.

  4. Q: What is the voltage rating of DS1013S-75? A: The voltage rating of DS1013S-75 is typically 75 volts, which makes it suitable for applications requiring higher voltage levels.

  5. Q: Can DS1013S-75 be used in both AC and DC circuits? A: Yes, DS1013S-75 is designed to work with both AC and DC circuits, providing flexibility in its application.

  6. Q: Is DS1013S-75 compatible with different communication protocols? A: Yes, DS1013S-75 is often designed to support various communication protocols such as UART, SPI, I2C, and CAN, enabling seamless integration into different systems.

  7. Q: What is the typical operating temperature range of DS1013S-75? A: The typical operating temperature range of DS1013S-75 is -40°C to +85°C, allowing it to function reliably in harsh environments.

  8. Q: Does DS1013S-75 require any external components for its operation? A: DS1013S-75 may require additional external components such as resistors, capacitors, or connectors depending on the specific application requirements.

  9. Q: Can DS1013S-75 be used in high-speed applications? A: Yes, DS1013S-75 is often designed to support high-speed data transfer and processing, making it suitable for demanding applications that require fast response times.

  10. Q: Where can I find more information about DS1013S-75? A: You can find more detailed information about DS1013S-75 in the product datasheet, user manual, or by contacting the manufacturer's technical support team.