รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
MAX16823ATE+T

MAX16823ATE+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: LED Driver
  • Characteristics: High Efficiency, Wide Input Voltage Range, Dimming Control
  • Package: 16-TDFN (3x3mm)
  • Essence: Power Management IC for driving high-brightness LEDs
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Current: Up to 1.5A
  • Switching Frequency: Adjustable up to 2MHz
  • Dimming Control: Analog/PWM
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX16823ATE+T has a total of 16 pins arranged as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. DIM: Dimming control input pin
  5. FB: Feedback pin
  6. BST: Boost capacitor connection pin
  7. LX: Switch node pin
  8. AGND: Analog ground pin
  9. VCC: Supply voltage pin
  10. PGND: Power ground pin
  11. SS/TRISET: Soft-start/tri-set pin
  12. CS: Current sense pin
  13. RT: External resistor connection pin for setting switching frequency
  14. PWM: PWM dimming input pin
  15. SYNC: Synchronization input pin
  16. COMP: Compensation pin

Functional Features

  • High efficiency power conversion for driving high-brightness LEDs
  • Wide input voltage range allows operation in various applications
  • Adjustable switching frequency for optimal performance
  • Analog or PWM dimming control for brightness adjustment
  • Synchronization input for multi-device operation
  • Soft-start feature for controlled startup

Advantages and Disadvantages

Advantages

  • High efficiency results in reduced power consumption
  • Wide input voltage range enables versatile application usage
  • Dimming control allows flexibility in adjusting brightness levels
  • Synchronization capability facilitates multi-device operation
  • Soft-start feature prevents excessive inrush current during startup

Disadvantages

  • Limited output current of up to 1.5A may not be suitable for high-power LED applications
  • Requires external components for proper operation, increasing complexity

Working Principles

The MAX16823ATE+T is a power management IC designed specifically for driving high-brightness LEDs. It operates by converting the input voltage into a regulated current source for the LEDs. The device utilizes a boost converter topology to achieve high efficiency power conversion.

The input voltage range of 4.5V to 40V allows the MAX16823ATE+T to be used in a wide range of applications. The switching frequency can be adjusted to optimize performance based on specific requirements. The dimming control feature enables adjustment of the LED brightness using either analog or PWM signals.

The synchronization input allows multiple devices to operate together, ensuring coordinated LED lighting effects. The soft-start feature ensures a controlled startup, preventing excessive inrush current that could damage the LEDs or the driver circuitry.

Detailed Application Field Plans

The MAX16823ATE+T is suitable for various applications where high-brightness LED lighting is required. Some potential application fields include:

  1. Automotive Lighting: LED headlights, taillights, and interior lighting systems.
  2. Industrial Lighting: High-power LED fixtures for warehouses, factories, and outdoor areas.
  3. Architectural Lighting: Accent lighting, façade illumination, and decorative lighting installations.
  4. Display Backlighting: LED backlighting for LCD panels in televisions, monitors, and signage.
  5. Street Lighting: Energy-efficient LED streetlights for urban and rural areas.

Detailed and Complete Alternative Models

  1. MAX16823ATE/V+: Similar to MAX16823ATE+T, but available in a different package (16-TQFN).
  2. MAX16823BTE+T: Enhanced version with higher output current capability (up to 3A).
  3. MAX16823CTE+T: Lower cost variant with reduced features and performance specifications.

These alternative models provide options based on specific requirements, allowing flexibility in choosing the most suitable LED driver solution.

Word count: 529 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ MAX16823ATE+T ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of MAX16823ATE+T:

  1. Q: What is the MAX16823ATE+T? A: The MAX16823ATE+T is a high-voltage, current-mode LED driver IC designed for automotive lighting applications.

  2. Q: What is the input voltage range supported by MAX16823ATE+T? A: The MAX16823ATE+T supports an input voltage range from 4.5V to 65V.

  3. Q: What is the maximum output current that can be delivered by MAX16823ATE+T? A: The MAX16823ATE+T can deliver a maximum output current of 1.5A.

  4. Q: Can MAX16823ATE+T drive multiple LEDs in series? A: Yes, MAX16823ATE+T can drive multiple LEDs in series by using an external boost converter.

  5. Q: Does MAX16823ATE+T support PWM dimming? A: Yes, MAX16823ATE+T supports PWM dimming with a frequency range up to 25kHz.

  6. Q: Is thermal protection included in MAX16823ATE+T? A: Yes, MAX16823ATE+T includes thermal protection to prevent overheating.

  7. Q: Can MAX16823ATE+T operate in a wide temperature range? A: Yes, MAX16823ATE+T can operate in a temperature range from -40°C to +125°C.

  8. Q: Does MAX16823ATE+T have built-in fault detection features? A: Yes, MAX16823ATE+T includes fault detection features such as open/short LED detection and overvoltage protection.

  9. Q: Can MAX16823ATE+T be used in non-automotive applications? A: Yes, MAX16823ATE+T can be used in various lighting applications that require high-voltage LED driving.

  10. Q: What package does MAX16823ATE+T come in? A: MAX16823ATE+T is available in a 16-pin TQFN package.

Please note that these answers are based on general information and it's always recommended to refer to the datasheet and application notes for detailed specifications and guidelines when using MAX16823ATE+T in specific technical solutions.