Microchip Technology
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
AT17F040A-30QI
ดูรายละเอียด แผ่นข้อมูล

AT17F040A-30QI

Product Overview

Category

AT17F040A-30QI belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

  • Non-volatile: Retains data even when power is turned off.
  • High storage capacity: Can store a large amount of data.
  • Fast access time: Allows for quick retrieval of stored information.
  • Low power consumption: Operates efficiently with minimal power usage.

Package

AT17F040A-30QI is available in a compact quad flat package (QFP).

Essence

The essence of AT17F040A-30QI lies in its ability to provide reliable and persistent storage for electronic systems.

Packaging/Quantity

This product is typically packaged in reels or trays, with each reel or tray containing a specific quantity of AT17F040A-30QI units.

Specifications

  • Model: AT17F040A-30QI
  • Memory Type: Non-volatile
  • Storage Capacity: 4 Megabits (512 Kilobytes)
  • Access Time: 30 nanoseconds
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AT17F040A-30QI has a total of 32 pins, which are configured as follows:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. A0-A18: Address inputs
  4. CE: Chip enable
  5. OE: Output enable
  6. WE: Write enable
  7. RESET: Reset pin
  8. WP: Write protect
  9. DQ0-DQ7: Data input/output lines

Functional Features

  • High-speed read and write operations
  • Sector erase and byte programming capabilities
  • Built-in error detection and correction mechanisms
  • Low power consumption in standby mode
  • Multiple operating modes for flexible usage

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity allows for storing large amounts of information.
  • Fast access time enables quick retrieval of data.
  • Low power consumption contributes to energy efficiency.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively higher cost per unit compared to some alternative models.
  • Requires careful handling to prevent damage to the delicate pins.

Working Principles

AT17F040A-30QI utilizes a combination of electronic circuits and semiconductor technology to store and retrieve digital information. It employs a system of transistors and capacitors to represent and store binary data as electrical charges.

Detailed Application Field Plans

AT17F040A-30QI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AT17F040A-30QI include: - AT28C256-15PU - SST39SF010A-70-4C-PH - W27C512-45Z

These models provide comparable features and can be considered as alternatives based on specific requirements and compatibility with the target system.

In conclusion, AT17F040A-30QI is a non-volatile memory device with high storage capacity, fast access time, and low power consumption. It is widely used in various electronic systems for reliable data storage and retrieval.

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ AT17F040A-30QI ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of AT17F040A-30QI in technical solutions:

  1. Question: What is the AT17F040A-30QI?
    Answer: The AT17F040A-30QI is a specific model of non-volatile memory integrated circuit (IC) manufactured by a company called Microchip Technology.

  2. Question: What is the purpose of using the AT17F040A-30QI in technical solutions?
    Answer: The AT17F040A-30QI is commonly used for storing program code or data in various electronic devices, such as microcontrollers, embedded systems, or communication devices.

  3. Question: What is the storage capacity of the AT17F040A-30QI?
    Answer: The AT17F040A-30QI has a storage capacity of 4 megabits (Mb), which is equivalent to 512 kilobytes (KB).

  4. Question: What is the operating voltage range for the AT17F040A-30QI?
    Answer: The AT17F040A-30QI operates within a voltage range of 2.7V to 3.6V.

  5. Question: Can the AT17F040A-30QI be reprogrammed multiple times?
    Answer: No, the AT17F040A-30QI is a one-time programmable (OTP) memory, meaning that it can only be programmed once and cannot be erased or reprogrammed afterwards.

  6. Question: Is the AT17F040A-30QI compatible with standard microcontroller interfaces?
    Answer: Yes, the AT17F040A-30QI uses a standard Serial Peripheral Interface (SPI) protocol, making it compatible with many microcontrollers and other devices that support SPI communication.

  7. Question: What is the maximum operating frequency of the AT17F040A-30QI?
    Answer: The AT17F040A-30QI can operate at a maximum frequency of 30 MHz.

  8. Question: Can the AT17F040A-30QI withstand extreme temperatures?
    Answer: Yes, the AT17F040A-30QI has an extended temperature range and can operate reliably in temperatures ranging from -40°C to +85°C.

  9. Question: Does the AT17F040A-30QI have any built-in security features?
    Answer: Yes, the AT17F040A-30QI provides several security features, such as write protection, password protection, and lock bits, to prevent unauthorized access or modification of stored data.

  10. Question: Are there any specific application examples where the AT17F040A-30QI is commonly used?
    Answer: Yes, the AT17F040A-30QI is often used in applications like automotive electronics, industrial control systems, medical devices, and consumer electronics where reliable non-volatile memory storage is required.

Please note that these answers are general and may vary depending on the specific requirements and use cases of the technical solution.