MT45W1MW16BDGB-701 IT TR
Basic Information Overview
- Category: Memory chip
- Use: Data storage and retrieval in electronic devices
- Characteristics:
- Non-volatile memory
- High-speed operation
- Low power consumption
- Package: BGA (Ball Grid Array)
- Essence: Provides reliable and efficient data storage solution
- Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements
Specifications
- Memory Type: NAND Flash
- Capacity: 1 gigabit (128 megabytes)
- Organization: 1 bank of 2,048 pages with 64 bytes per page
- Interface: Parallel
- Voltage Supply: 2.7V - 3.6V
- Operating Temperature Range: -40°C to +85°C
- Data Retention: Up to 10 years
- Endurance: Up to 100,000 program/erase cycles
Detailed Pin Configuration
The MT45W1MW16BDGB-701 IT TR has a total of 48 pins. The pin configuration is as follows:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage | | 2 | A0-A18 | Address inputs | | 19 | DQ0-DQ15 | Data inputs/outputs | | 20 | WE# | Write Enable | | 21 | CE# | Chip Enable | | 22 | RE# | Read Enable | | ... | ... | ... |
Functional Features
- Fast read and write operations
- Block erase and program operations
- Hardware data protection features
- Automatic page/block management
- Error correction code (ECC) support
- Bad block management
Advantages
- High-speed operation allows for quick data access
- Non-volatile memory retains data even when power is disconnected
- Low power consumption extends battery life in portable devices
- Reliable and durable, with high endurance and data retention capabilities
Disadvantages
- Limited capacity compared to other memory options
- Higher cost per gigabyte compared to some alternatives
- Requires additional circuitry for interfacing with the host device
Working Principles
The MT45W1MW16BDGB-701 IT TR utilizes NAND flash technology to store and retrieve data. It consists of multiple memory cells organized into pages and blocks. Data can be written to and read from these cells using specific commands and addresses. The chip incorporates various mechanisms to ensure data integrity, such as error correction codes and bad block management.
Detailed Application Field Plans
The MT45W1MW16BDGB-701 IT TR is commonly used in a wide range of electronic devices, including: - Smartphones and tablets - Solid-state drives (SSDs) - Digital cameras - Portable gaming consoles - Industrial control systems
Detailed and Complete Alternative Models
- MT29F1G08ABADAWP-IT:A - 1 gigabit NAND Flash memory chip with similar specifications
- S34ML01G100TFI000 - 1 gigabit NAND Flash memory chip with different package and interface options
- IS43TR16256AL-125KBLI - 1 gigabit DDR3L SDRAM chip with higher speed and volatile memory characteristics
Note: This entry provides an overview of the MT45W1MW16BDGB-701 IT TR memory chip. For more detailed information, please refer to the manufacturer's datasheet.
Word count: 366
แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ MT45W1MW16BDGB-701 IT TR ในโซลูชันทางเทคนิค
Sure! Here are 10 common questions and answers related to the application of MT45W1MW16BDGB-701 IT TR in technical solutions:
1. What is the MT45W1MW16BDGB-701 IT TR? The MT45W1MW16BDGB-701 IT TR is a specific model of DDR3 SDRAM memory module commonly used in technical solutions.
2. What is the capacity of the MT45W1MW16BDGB-701 IT TR? The MT45W1MW16BDGB-701 IT TR has a capacity of 1 gigabit (Gb), which is equivalent to 128 megabytes (MB).
3. What is the speed rating of the MT45W1MW16BDGB-701 IT TR? The MT45W1MW16BDGB-701 IT TR has a speed rating of 1600 megahertz (MHz), which refers to the maximum data transfer rate it can achieve.
4. Can the MT45W1MW16BDGB-701 IT TR be used in laptops or desktop computers? Yes, the MT45W1MW16BDGB-701 IT TR can be used in both laptops and desktop computers, as long as they support DDR3 SDRAM memory modules.
5. Is the MT45W1MW16BDGB-701 IT TR compatible with other memory modules? Yes, the MT45W1MW16BDGB-701 IT TR is compatible with other DDR3 SDRAM memory modules, as long as they have the same specifications and speed rating.
6. What voltage does the MT45W1MW16BDGB-701 IT TR operate at? The MT45W1MW16BDGB-701 IT TR operates at a voltage of 1.5 volts (V).
7. Can the MT45W1MW16BDGB-701 IT TR be overclocked? Yes, the MT45W1MW16BDGB-701 IT TR can be overclocked to achieve higher data transfer rates, but it may void the warranty and could potentially cause stability issues.
8. What is the form factor of the MT45W1MW16BDGB-701 IT TR? The MT45W1MW16BDGB-701 IT TR has a small outline dual in-line memory module (SO-DIMM) form factor, which is commonly used in laptops and small form factor systems.
9. Can the MT45W1MW16BDGB-701 IT TR be used in servers or high-performance systems? While the MT45W1MW16BDGB-701 IT TR can technically be used in servers or high-performance systems, it may not provide sufficient capacity or performance for demanding applications.
10. Is the MT45W1MW16BDGB-701 IT TR suitable for gaming? The MT45W1MW16BDGB-701 IT TR may not be the ideal choice for gaming, as it has relatively low capacity and speed compared to dedicated gaming memory modules.
Please note that these answers are general and may vary depending on specific technical requirements and compatibility with other components in a given system.