The MT48H4M16LFB4-8 IT:H IC has a total of 60 pins arranged in a specific configuration. The pinout is as follows:
Advantages: - High-speed operation enables efficient data processing. - Low power consumption prolongs battery life in portable devices. - Large storage capacity accommodates extensive data storage needs. - Reliable performance ensures consistent memory operations.
Disadvantages: - Limited compatibility with certain systems due to specific pin configuration. - Higher cost compared to lower-capacity memory modules. - Vulnerable to data loss in case of power failure without proper backup measures.
The MT48H4M16LFB4-8 IT:H is a dynamic random access memory (DRAM) module that stores data in capacitors within its memory cells. These capacitors need to be periodically refreshed to maintain the stored data, as DRAM is volatile memory. The IC communicates with the system through its parallel interface, allowing for fast data transfer between the memory and the processor.
The MT48H4M16LFB4-8 IT:H is widely used in various applications that require high-speed and large-capacity memory, such as:
Sure! Here are 10 common questions and answers related to the application of MT48H4M16LFB4-8 IT:H in technical solutions:
Q: What is the MT48H4M16LFB4-8 IT:H memory module used for? A: The MT48H4M16LFB4-8 IT:H is a high-speed synchronous dynamic random-access memory (SDRAM) module commonly used in various technical solutions, such as computer systems, networking equipment, and embedded systems.
Q: What is the capacity of the MT48H4M16LFB4-8 IT:H memory module? A: The MT48H4M16LFB4-8 IT:H has a capacity of 64 megabytes (MB), which is equivalent to 512 megabits (Mb).
Q: What is the speed rating of the MT48H4M16LFB4-8 IT:H memory module? A: The "8" in the part number (MT48H4M16LFB4-8 IT:H) indicates that it operates at a maximum clock frequency of 800 megahertz (MHz).
Q: Is the MT48H4M16LFB4-8 IT:H memory module compatible with different voltage levels? A: Yes, the MT48H4M16LFB4-8 IT:H supports both 3.3-volt (V) and 2.5V power supply voltages, making it versatile for various applications.
Q: Can I use multiple MT48H4M16LFB4-8 IT:H memory modules together? A: Yes, you can use multiple MT48H4M16LFB4-8 IT:H modules in parallel to increase the overall memory capacity of your system.
Q: What is the data transfer rate of the MT48H4M16LFB4-8 IT:H memory module? A: The MT48H4M16LFB4-8 IT:H supports a maximum data transfer rate of 1.6 gigabits per second (Gbps).
Q: Does the MT48H4M16LFB4-8 IT:H memory module have any built-in error correction capabilities? A: No, the MT48H4M16LFB4-8 IT:H does not have built-in error correction capabilities. However, it can be used in conjunction with external error correction techniques if required.
Q: Can the MT48H4M16LFB4-8 IT:H memory module operate in different temperature ranges? A: Yes, the MT48H4M16LFB4-8 IT:H is designed to operate within a wide temperature range, typically from -40 degrees Celsius to +85 degrees Celsius.
Q: Is the MT48H4M16LFB4-8 IT:H memory module compatible with different bus architectures? A: Yes, the MT48H4M16LFB4-8 IT:H supports various bus architectures, including the industry-standard double data rate (DDR) and DDR2 interfaces.
Q: Are there any specific design considerations when using the MT48H4M16LFB4-8 IT:H memory module? A: It is important to follow the recommended layout guidelines provided by the manufacturer to ensure proper signal integrity and performance when integrating the MT48H4M16LFB4-8 IT:H into your technical solution.
Please note that the answers provided here are general and may vary depending on specific application requirements and configurations.