ON Semiconductor
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
BD13610STU
ดูรายละเอียด แผ่นข้อมูล

BD13610STU

Product Category: Integrated Circuit

Basic Information Overview: - Category: Analog Voltage Regulator - Use: Regulating voltage in electronic circuits - Characteristics: Low dropout voltage, high accuracy, low quiescent current - Package: TO-220 - Essence: Stabilizing and regulating input voltage - Packaging/Quantity: 25 pieces per tube

Specifications: - Input Voltage Range: 4.5V to 20V - Output Voltage Range: 1.25V to 18V - Dropout Voltage: 0.5V at 1A - Quiescent Current: 75µA - Load Regulation: 0.1% typical

Detailed Pin Configuration: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)

Functional Features: - Low dropout voltage for extended battery life - High accuracy for precise voltage regulation - Low quiescent current for reduced power consumption

Advantages: - Wide input voltage range - Excellent load regulation - Thermal shutdown protection

Disadvantages: - Higher cost compared to traditional linear regulators - Sensitive to input voltage transients

Working Principles: The BD13610STU regulates the output voltage by comparing it to a reference voltage and adjusting the pass transistor to maintain a stable output.

Detailed Application Field Plans: - Battery-powered devices - Automotive electronics - Portable consumer electronics

Detailed and Complete Alternative Models: - LM317 - LT1086 - ADP3338

This integrated circuit is widely used in various electronic devices due to its efficient voltage regulation and low power consumption.

[Word Count: 240]

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ BD13610STU ในโซลูชันทางเทคนิค

  1. What is the BD13610STU?

    • The BD13610STU is a high-voltage NPN transistor designed for use in various technical solutions.

  2. What are the key features of the BD13610STU?

    • The BD13610STU features a high voltage capability, low base-drive requirements, and high current gain, making it suitable for a wide range of applications.

  3. What are the typical applications of the BD13610STU?

    • Typical applications include power management, motor control, and general purpose switching in industrial and consumer electronics.

  4. What is the maximum voltage and current rating of the BD13610STU?

    • The BD13610STU has a maximum voltage rating of [insert voltage] and a maximum current rating of [insert current].

  5. What is the pin configuration of the BD13610STU?

    • The BD13610STU typically comes in a [insert package type] package with standard pin configurations.

  6. What are the recommended operating conditions for the BD13610STU?

    • The BD13610STU operates within a specified temperature range and requires certain voltage and current levels for optimal performance.

  7. Are there any specific design considerations when using the BD13610STU?

    • Designers should consider factors such as heat dissipation, voltage spikes, and current surges when incorporating the BD13610STU into their circuits.

  8. Does the BD13610STU require any external components for proper operation?

    • Depending on the application, the BD13610STU may require external resistors, capacitors, or diodes to ensure reliable and safe operation.

  9. What are the thermal characteristics of the BD13610STU?

    • The BD13610STU has specific thermal resistance values and junction temperature limits that need to be taken into account for thermal management.

  10. Where can I find detailed technical specifications and application notes for the BD13610STU?

    • Detailed technical specifications and application notes for the BD13610STU can be found in the datasheet provided by the manufacturer or on their official website.