รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
CAT24C04WI-G

CAT24C04WI-G

Product Overview

Category

The CAT24C04WI-G belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The CAT24C04WI-G retains stored data even when power is removed.
  • Electrically erasable: Data can be erased and reprogrammed electronically.
  • High endurance: This chip supports a high number of write/erase cycles.
  • Low power consumption: It operates at low voltage levels, making it energy-efficient.

Package

The CAT24C04WI-G is available in an 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of the CAT24C04WI-G lies in its ability to store and retrieve digital information reliably and efficiently.

Packaging/Quantity

This chip is typically sold in reels or tubes, with each reel containing a specific quantity of chips. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Memory capacity: 4 kilobits (512 bytes)
  • Operating voltage: 1.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Write cycle endurance: Up to 1 million cycles
  • Data retention: Up to 200 years

Detailed Pin Configuration

The CAT24C04WI-G has the following pin configuration:

  1. A0: Address input bit 0
  2. A1: Address input bit 1
  3. A2: Address input bit 2
  4. GND: Ground
  5. SDA: Serial data input/output
  6. SCL: Serial clock input
  7. WP: Write protect
  8. VCC: Power supply

Functional Features

  • Random access: Allows reading and writing of data at any memory location.
  • Byte-level operations: Supports individual byte read, write, and erase operations.
  • Sequential read: Enables consecutive reading of multiple memory locations.
  • Hardware write protection: The WP pin can be used to protect the memory from accidental writes.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: Data remains intact even during power loss.
  • High endurance: Can withstand a large number of write/erase cycles.
  • Low power consumption: Operates efficiently with low power requirements.
  • Compact package: Comes in a small form factor, suitable for space-constrained designs.

Disadvantages

  • Limited storage capacity: With only 4 kilobits, it may not be sufficient for certain applications requiring larger memory sizes.
  • Relatively slower write speed compared to other memory technologies.

Working Principles

The CAT24C04WI-G utilizes electrically controlled floating gate transistors to store and retrieve digital information. When data is written, charges are trapped in the floating gate, altering the transistor's behavior. These charges can be removed during the erase operation, allowing new data to be written.

Detailed Application Field Plans

The CAT24C04WI-G finds application in various fields, including: 1. Embedded systems: Used for storing configuration data, firmware updates, and calibration parameters. 2. Automotive electronics: Employed in vehicle control modules for storing critical data like mileage, fault codes, and settings. 3. Industrial automation: Utilized for storing production data, machine settings, and user preferences. 4. Consumer electronics: Found in devices like smart TVs, set-top boxes, and gaming consoles for storing user profiles, preferences, and application data.

Detailed and Complete Alternative Models

Some alternative models to the CAT24C04WI-G include: - AT24C04: Manufactured by Atmel, offering similar specifications and functionality. - 24LC04B: Produced by Microchip, providing comparable features and compatibility.

These alternative models can be considered based on specific project requirements, availability, and cost considerations.

Word count: 550 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ CAT24C04WI-G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of CAT24C04WI-G in technical solutions:

  1. Q: What is CAT24C04WI-G? A: CAT24C04WI-G is a 4K-bit I2C Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by ON Semiconductor.

  2. Q: What is the operating voltage range of CAT24C04WI-G? A: The operating voltage range of CAT24C04WI-G is typically between 1.7V and 5.5V.

  3. Q: How much memory does CAT24C04WI-G have? A: CAT24C04WI-G has a total memory capacity of 4 kilobits, which is equivalent to 512 bytes or 256 words.

  4. Q: What is the maximum clock frequency supported by CAT24C04WI-G? A: CAT24C04WI-G supports a maximum clock frequency of 400 kHz.

  5. Q: Can CAT24C04WI-G be used for storing program code? A: No, CAT24C04WI-G is primarily designed for storing small amounts of non-volatile data such as configuration settings, calibration data, or user preferences.

  6. Q: Is CAT24C04WI-G suitable for automotive applications? A: Yes, CAT24C04WI-G is qualified for automotive applications and can operate reliably in harsh environments.

  7. Q: Does CAT24C04WI-G support write protection? A: Yes, CAT24C04WI-G provides hardware write protection through the use of a write protect pin (WP) that can be tied to VCC or GND to enable or disable write operations.

  8. Q: What is the typical endurance of CAT24C04WI-G? A: CAT24C04WI-G has a typical endurance of 1 million write cycles, meaning it can be written to and erased approximately 1 million times before it may start to exhibit errors.

  9. Q: Can CAT24C04WI-G operate at high temperatures? A: Yes, CAT24C04WI-G is rated for operation in the industrial temperature range of -40°C to +85°C.

  10. Q: What is the package type of CAT24C04WI-G? A: CAT24C04WI-G is available in an 8-pin SOIC (Small Outline Integrated Circuit) package, which is commonly used in many electronic applications.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of CAT24C04WI-G.