ON Semiconductor
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
MC74VHCT126ADR2G
ดูรายละเอียด แผ่นข้อมูล

MC74VHCT126ADR2G

Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Gate
  • Characteristics: High-Speed, Low-Power, Quad Bus Buffer
  • Package: SOIC-14
  • Essence: Buffering and amplifying digital signals
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • Input Voltage Range: -0.5V to VCC + 0.5V
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 200MHz
  • Propagation Delay Time: 3.5ns (typical)
  • Output Drive Capability: ±24mA

Pin Configuration

The MC74VHCT126ADR2G has a total of 14 pins arranged as follows:

__ __ 1 | 1 14 | VCC 2 | 2 13 | A 3 | 3 12 | B 4 | 4 11 | C 5 | 5 10 | D GND | 6 9 | OE# 7 | 7 8 | Y --------

Functional Features

  • Quad bus buffer with 3-state outputs
  • High-speed operation suitable for various applications
  • Low power consumption for energy-efficient designs
  • Wide supply voltage range allows compatibility with different systems
  • 3-state outputs provide flexibility in controlling signal flow

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data transfer - Low power consumption prolongs battery life in portable devices - Wide supply voltage range increases compatibility - 3-state outputs offer flexibility in signal routing

Disadvantages: - Limited output drive capability may not be suitable for high-current applications - Propagation delay time may affect timing-sensitive designs

Working Principles

The MC74VHCT126ADR2G is a quad bus buffer that amplifies and buffers digital signals. It operates by receiving input signals (A, B, C, D) and providing amplified outputs (Y) based on the logic levels of the inputs. The OE# pin controls the output enable/disable function, allowing the device to be put into a high-impedance state when not required.

Detailed Application Field Plans

The MC74VHCT126ADR2G can be used in various applications, including but not limited to: - Data communication systems - Microprocessor-based systems - Industrial control systems - Automotive electronics - Consumer electronics

Alternative Models

  1. SN74LVC126ADR - Low-Voltage Quad Bus Buffer with 3-State Outputs
  2. CD74HC126E - High-Speed CMOS Logic Quad Bus Buffer with 3-State Outputs
  3. 74ACT125SCX - Quadruple Bus Buffer Gates with 3-State Outputs

These alternative models offer similar functionality and can be considered as substitutes for the MC74VHCT126ADR2G depending on specific requirements.

Word count: 275 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ MC74VHCT126ADR2G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of MC74VHCT126ADR2G in technical solutions:

  1. Q: What is MC74VHCT126ADR2G? A: MC74VHCT126ADR2G is a quad buffer/line driver IC (integrated circuit) that can be used for signal buffering and level shifting applications.

  2. Q: What is the operating voltage range of MC74VHCT126ADR2G? A: The operating voltage range of MC74VHCT126ADR2G is typically between 2V and 5.5V.

  3. Q: Can MC74VHCT126ADR2G handle high-speed signals? A: Yes, MC74VHCT126ADR2G is designed to handle high-speed signals with a maximum propagation delay of 8 ns.

  4. Q: How many buffer/driver channels are there in MC74VHCT126ADR2G? A: MC74VHCT126ADR2G has four independent buffer/driver channels.

  5. Q: What is the output current capability of MC74VHCT126ADR2G? A: MC74VHCT126ADR2G can source or sink up to 8 mA of current per channel.

  6. Q: Can MC74VHCT126ADR2G be used for bidirectional communication? A: No, MC74VHCT126ADR2G is a unidirectional buffer/driver and does not support bidirectional communication.

  7. Q: Is MC74VHCT126ADR2G compatible with TTL (Transistor-Transistor Logic) inputs? A: Yes, MC74VHCT126ADR2G is compatible with both CMOS (Complementary Metal-Oxide-Semiconductor) and TTL inputs.

  8. Q: What is the maximum operating frequency of MC74VHCT126ADR2G? A: The maximum operating frequency of MC74VHCT126ADR2G is typically around 100 MHz.

  9. Q: Can MC74VHCT126ADR2G be used in automotive applications? A: Yes, MC74VHCT126ADR2G is qualified for automotive applications and can operate in a wide temperature range.

  10. Q: Are there any specific precautions to consider when using MC74VHCT126ADR2G? A: It is important to follow the recommended operating conditions, such as voltage levels and temperature ranges, specified in the datasheet of MC74VHCT126ADR2G. Additionally, proper decoupling capacitors should be used to ensure stable operation.