ON Semiconductor
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
NCP1216AP65G
ดูรายละเอียด แผ่นข้อมูล

NCP1216AP65G

Product Overview

Category

NCP1216AP65G belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in power management applications.

Characteristics

  • High efficiency
  • Low standby power consumption
  • Wide input voltage range
  • Overvoltage protection
  • Thermal shutdown protection

Package

NCP1216AP65G is available in a compact and industry-standard package, such as a 16-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of NCP1216AP65G lies in its ability to efficiently regulate and control power in various electronic devices.

Packaging/Quantity

Typically, NCP1216AP65G is supplied in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 85V - 265V AC
  • Output Voltage: Adjustable (based on external components)
  • Output Power: Up to 65W
  • Switching Frequency: 65kHz (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. CS: Current sense pin for current limit protection
  6. SS: Soft-start pin for controlled startup
  7. EN: Enable pin for turning the IC on/off
  8. VDD: Internal voltage regulator output
  9. VREF: Reference voltage output
  10. INV: Inverting input for error amplifier
  11. NC: No connection
  12. DRV: Gate driver output
  13. DRAIN: Power MOSFET drain pin
  14. SOURCE: Power MOSFET source pin
  15. VCC: Power supply input
  16. GND: Ground reference

Functional Features

  • Constant voltage (CV) and constant current (CC) regulation modes
  • Overvoltage protection (OVP)
  • Thermal shutdown protection (TSD)
  • Soft-start for controlled startup
  • Frequency jittering for reduced EMI emissions
  • Cycle-by-cycle current limit protection

Advantages and Disadvantages

Advantages

  • High efficiency leads to energy savings
  • Wide input voltage range allows for universal compatibility
  • Compact package size enables space-saving designs
  • Comprehensive protection features enhance system reliability
  • Adjustable output voltage provides flexibility in various applications

Disadvantages

  • Requires external components for precise voltage regulation
  • Limited output power compared to higher-rated ICs
  • Higher cost compared to non-integrated solutions

Working Principles

NCP1216AP65G operates as a flyback controller, utilizing a pulse-width modulation (PWM) technique to regulate the output voltage. It senses the feedback voltage through the FB pin and adjusts the duty cycle of the internal power MOSFET accordingly. This control mechanism ensures stable and accurate voltage regulation.

Detailed Application Field Plans

NCP1216AP65G finds extensive use in various power management applications, including but not limited to: - AC-DC power supplies - LED lighting systems - Battery chargers - Industrial automation equipment - Consumer electronics

Detailed and Complete Alternative Models

  1. NCP1215AP65G
  2. NCP1217AP65G
  3. NCP1218AP65G
  4. NCP1219AP65G
  5. NCP1220AP65G

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 498 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ NCP1216AP65G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of NCP1216AP65G in technical solutions:

  1. Q: What is NCP1216AP65G? A: NCP1216AP65G is a power management IC (PMIC) designed for offline flyback converters used in various applications.

  2. Q: What are the key features of NCP1216AP65G? A: Some key features include high-voltage startup, frequency jittering for EMI reduction, adjustable switching frequency, and built-in protection features.

  3. Q: What is the typical input voltage range for NCP1216AP65G? A: The typical input voltage range is between 85V and 265V AC.

  4. Q: Can NCP1216AP65G be used in low-power applications? A: Yes, NCP1216AP65G can be used in low-power applications as it has a low standby power consumption and supports burst mode operation.

  5. Q: How does NCP1216AP65G help in reducing electromagnetic interference (EMI)? A: NCP1216AP65G incorporates frequency jittering technique, which helps in spreading the energy across a wider frequency spectrum, reducing EMI emissions.

  6. Q: Does NCP1216AP65G have built-in protection features? A: Yes, NCP1216AP65G has built-in protection features such as overvoltage protection (OVP), overload protection (OLP), and thermal shutdown.

  7. Q: Can NCP1216AP65G operate in continuous conduction mode (CCM)? A: Yes, NCP1216AP65G can operate in both discontinuous conduction mode (DCM) and continuous conduction mode (CCM) depending on the application requirements.

  8. Q: What is the maximum output power that NCP1216AP65G can handle? A: The maximum output power depends on the specific design and external components used, but typically it can handle power levels up to 65W.

  9. Q: Is NCP1216AP65G suitable for universal input voltage applications? A: Yes, NCP1216AP65G is designed to work with a wide input voltage range (85V-265V AC), making it suitable for universal input voltage applications.

  10. Q: Are there any reference designs or application notes available for NCP1216AP65G? A: Yes, ON Semiconductor provides reference designs and application notes that can help in implementing NCP1216AP65G in various technical solutions.

Please note that the answers provided here are general and may vary based on specific design considerations and requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.