Panasonic Electronic Components
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
ERT-J1VG103FM
ดูรายละเอียด แผ่นข้อมูล

ERT-J1VG103FM Product Overview

Introduction

The ERT-J1VG103FM is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to ensure stable and regulated power supply, thereby enhancing the overall performance and reliability of the connected components.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: To regulate and stabilize voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: TO-220, TO-252, TO-263
  • Essence: Ensures consistent and reliable power supply
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 1.25V to 37V
  • Output Current: Up to 3A
  • Dropout Voltage: 1.5V at 3A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The ERT-J1VG103FM typically features three pins: 1. Input (VIN): Connects to the input voltage source 2. Ground (GND): Connected to the ground reference 3. Output (VOUT): Provides the regulated output voltage

Functional Features

  • High Precision: Provides accurate and stable output voltage
  • Low Dropout Voltage: Ensures efficient operation even with small voltage differentials
  • Thermal Shutdown Protection: Safeguards the device from overheating

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Wide input voltage range
  • Thermal protection for enhanced safety

Disadvantages

  • Higher dropout voltage compared to some alternative models
  • Limited maximum output current

Working Principles

The ERT-J1VG103FM utilizes internal circuitry to compare the actual output voltage with a reference voltage and adjusts the output to maintain a constant voltage level. It employs feedback mechanisms to achieve precise regulation and incorporates thermal protection to prevent damage due to excessive heat.

Detailed Application Field Plans

The ERT-J1VG103FM finds extensive application in various electronic systems, including: - Power supplies - Battery charging circuits - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to consider include: - LM317: Offers adjustable output voltage and higher maximum current - LM7805: Fixed 5V output with lower dropout voltage - LT1083: Higher current handling capability with adjustable output

In conclusion, the ERT-J1VG103FM serves as a crucial component in electronic systems, providing reliable voltage regulation and contributing to the overall stability and efficiency of the connected devices.

[Word Count: 411]

Please let me know if you need any further information or modifications.

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ ERT-J1VG103FM ในโซลูชันทางเทคนิค

  1. What is ERT-J1VG103FM?

    • ERT-J1VG103FM is a type of electronic component, specifically a ceramic capacitor with a specific capacitance value and voltage rating.

  2. What are the typical applications of ERT-J1VG103FM?

    • ERT-J1VG103FM capacitors are commonly used in power supplies, lighting ballasts, and other electronic devices where high voltage and high frequency performance is required.

  3. What is the capacitance and voltage rating of ERT-J1VG103FM?

    • The capacitance of ERT-J1VG103FM is 0.01µF (10nF) and the voltage rating is typically 630V.

  4. Are there any special considerations when using ERT-J1VG103FM in high voltage applications?

    • Yes, it's important to ensure that the ERT-J1VG103FM capacitor is properly rated for the application's voltage requirements and that appropriate safety measures are taken due to the high voltage.

  5. Can ERT-J1VG103FM be used in low frequency applications?

    • While ERT-J1VG103FM is designed for high frequency applications, it can also be used in certain low frequency circuits where its capacitance and voltage rating are suitable.

  6. What are the temperature characteristics of ERT-J1VG103FM?

    • ERT-J1VG103FM capacitors typically have a stable temperature coefficient, making them suitable for use in a wide range of operating temperatures.

  7. Is ERT-J1VG103FM suitable for automotive applications?

    • Yes, ERT-J1VG103FM capacitors can be used in automotive electronics, but it's important to verify that they meet the specific requirements and standards for automotive components.

  8. Are there any recommended soldering or mounting techniques for ERT-J1VG103FM?

    • It's recommended to follow the manufacturer's guidelines for soldering and mounting ERT-J1VG103FM to ensure proper electrical and mechanical performance.

  9. Can ERT-J1VG103FM be used in high humidity environments?

    • ERT-J1VG103FM capacitors are generally suitable for use in high humidity environments, but it's important to consider the potential impact on long-term reliability and performance.

  10. Where can I purchase ERT-J1VG103FM capacitors?

    • ERT-J1VG103FM capacitors can be purchased from authorized distributors or directly from the manufacturer. It's important to ensure that the components are sourced from reliable and reputable sources to guarantee their authenticity and quality.