รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
RT9058-60GVL

RT9058-60GVL

Product Overview

Category

RT9058-60GVL belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the output voltage.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

RT9058-60GVL comes in a compact SOT-23 package, which is suitable for surface mount applications.

Essence

The essence of RT9058-60GVL lies in its ability to provide a stable and regulated output voltage for various electronic devices.

Packaging/Quantity

RT9058-60GVL is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 6V
  • Output Voltage: 3.3V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

RT9058-60GVL has three pins:

  1. VIN (Pin 1): Input voltage pin.
  2. GND (Pin 2): Ground reference pin.
  3. VOUT (Pin 3): Regulated output voltage pin.

Functional Features

  • High Efficiency: The RT9058-60GVL exhibits high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: It can accept a wide range of input voltages, making it versatile for various applications.
  • Overcurrent Protection: The RT9058-60GVL incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
  • Thermal Shutdown Protection: In case of excessive temperature, the regulator automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range allows for flexibility in design.
  • Overcurrent and thermal shutdown protection enhance reliability and safety.

Disadvantages

  • Limited output current capacity (up to 150mA).
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

RT9058-60GVL operates based on a linear voltage regulation principle. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

RT9058-60GVL finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable audio players - Mobile phones - Wireless communication modules - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to RT9058-60GVL are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, RT9058-60GVL is a voltage regulator with high efficiency, low dropout voltage, and wide input voltage range. It provides stable and regulated output voltage for various electronic devices. While it has limitations in terms of output current capacity and dropout voltage, it offers advantages such as overcurrent and thermal shutdown protection. Its application field includes battery-powered devices, portable audio players, mobile phones, wireless communication modules, and IoT devices. Alternative models like LM1117-3.3, MCP1700-3302E/TO, and TS2937CP-3.3 can be considered for similar applications.

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ RT9058-60GVL ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of RT9058-60GVL in technical solutions:

  1. Question: What is RT9058-60GVL?
    - Answer: RT9058-60GVL is a specific model of voltage regulator IC (integrated circuit) used for power management in electronic devices.

  2. Question: What is the input voltage range supported by RT9058-60GVL?
    - Answer: The input voltage range supported by RT9058-60GVL is typically between 2.5V and 6V.

  3. Question: What is the output voltage provided by RT9058-60GVL?
    - Answer: RT9058-60GVL provides a fixed output voltage of 3.3V.

  4. Question: What is the maximum output current that RT9058-60GVL can handle?
    - Answer: RT9058-60GVL can handle a maximum output current of 600mA.

  5. Question: Is RT9058-60GVL suitable for battery-powered applications?
    - Answer: Yes, RT9058-60GVL is suitable for battery-powered applications as it has low quiescent current and supports a wide input voltage range.

  6. Question: Can RT9058-60GVL be used in automotive applications?
    - Answer: Yes, RT9058-60GVL can be used in automotive applications as it meets the necessary requirements for automotive electronics.

  7. Question: Does RT9058-60GVL have built-in protection features?
    - Answer: Yes, RT9058-60GVL has built-in protection features such as over-current protection, thermal shutdown, and short-circuit protection.

  8. Question: Can multiple RT9058-60GVL ICs be used in parallel to increase the output current?
    - Answer: No, it is not recommended to use multiple RT9058-60GVL ICs in parallel as it may cause stability issues and affect the overall performance.

  9. Question: What is the operating temperature range of RT9058-60GVL?
    - Answer: The operating temperature range of RT9058-60GVL is typically between -40°C and 85°C.

  10. Question: Are there any specific application notes or reference designs available for RT9058-60GVL?
    - Answer: Yes, the manufacturer of RT9058-60GVL provides application notes and reference designs that can help in implementing the IC effectively in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of RT9058-60GVL.