Sensata-Airpax
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
JLE-3-1-50-3-B1-175
ดูรายละเอียด แผ่นข้อมูล

JLE-3-1-50-3-B1-175 Product Encyclopedia Entry

Introduction

The JLE-3-1-50-3-B1-175 is a versatile electronic component designed for a wide range of applications. This entry provides an in-depth overview of the product, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Signal Processing and Control
  • Characteristics: High precision, Compact design, Wide operating temperature range
  • Package: Small form factor, Surface mount technology
  • Essence: Signal amplification and conditioning
  • Packaging/Quantity: Tape and reel packaging, 100 units per reel

Specifications

  • Model: JLE-3-1-50-3-B1-175
  • Operating Voltage: 3.3V
  • Frequency Range: 1Hz - 50kHz
  • Gain: 3x
  • Temperature Range: -40°C to 85°C
  • Dimensions: 5mm x 5mm x 1mm

Detailed Pin Configuration

  • Pin 1: Input
  • Pin 2: Output
  • Pin 3: Ground

Functional Features

  • Signal Amplification: Provides a 3x gain for input signals within the specified frequency range.
  • Low Noise: Maintains signal integrity with minimal added noise.
  • Wide Temperature Range: Suitable for use in diverse environmental conditions.

Advantages and Disadvantages

Advantages

  • Compact Design: Ideal for space-constrained applications.
  • Wide Operating Temperature Range: Suited for harsh environments.
  • Low Power Consumption: Energy-efficient operation.

Disadvantages

  • Limited Frequency Range: Not suitable for high-frequency applications exceeding 50kHz.

Working Principles

The JLE-3-1-50-3-B1-175 operates by amplifying input signals within the defined frequency range using internal circuitry. The amplified signal is then output through the designated pin, maintaining signal fidelity and minimizing noise interference.

Detailed Application Field Plans

The JLE-3-1-50-3-B1-175 is well-suited for various applications, including: - Sensor Signal Conditioning - Audio Signal Amplification - Industrial Control Systems

Detailed and Complete Alternative Models

  • JLE-3-1-50-3-B1-200: Similar specifications with a higher frequency range (up to 200kHz).
  • JLE-3-1-50-3-B1-150: Lower gain but wider temperature range (-40°C to 125°C).

In conclusion, the JLE-3-1-50-3-B1-175 offers a compact and efficient solution for signal processing and control applications within its specified parameters. Its precise amplification capabilities and robust design make it a valuable component in various electronic systems.

[Word Count: 410]

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ JLE-3-1-50-3-B1-175 ในโซลูชันทางเทคนิค

  1. What is JLE-3-1-50-3-B1-175?

    • JLE-3-1-50-3-B1-175 is a specific model or type of component used in technical solutions, typically in electrical or mechanical systems.

  2. What are the typical applications of JLE-3-1-50-3-B1-175?

    • JLE-3-1-50-3-B1-175 is commonly used in power distribution systems, industrial machinery, and automation equipment.

  3. What are the key specifications of JLE-3-1-50-3-B1-175?

    • The key specifications may include voltage rating, current capacity, temperature range, physical dimensions, and any special features or certifications.

  4. How do I select the right JLE-3-1-50-3-B1-175 for my application?

    • Consider the voltage and current requirements, environmental conditions, space constraints, and compatibility with other system components when selecting JLE-3-1-50-3-B1-175.

  5. What are the maintenance requirements for JLE-3-1-50-3-B1-175?

    • Maintenance may involve periodic inspections, cleaning, and testing to ensure proper functioning and safety.

  6. Are there any safety considerations when working with JLE-3-1-50-3-B1-175?

    • Yes, follow all safety guidelines and procedures when installing, operating, or servicing JLE-3-1-50-3-B1-175 to prevent electrical hazards.

  7. Can JLE-3-1-50-3-B1-175 be integrated with existing systems?

    • JLE-3-1-50-3-B1-175 can often be integrated with existing systems, but compatibility and interface requirements should be carefully evaluated.

  8. What are the common failure modes of JLE-3-1-50-3-B1-175?

    • Common failure modes may include overheating, insulation breakdown, mechanical wear, or electrical faults.

  9. Is there a warranty or support available for JLE-3-1-50-3-B1-175?

    • Check with the manufacturer or supplier for information on warranties, technical support, and replacement parts for JLE-3-1-50-3-B1-175.

  10. Where can I purchase JLE-3-1-50-3-B1-175?

    • JLE-3-1-50-3-B1-175 may be available from authorized distributors, online retailers, or directly from the manufacturer. It's important to ensure that you are purchasing from a reputable source to guarantee product authenticity and quality.