Taiwan Semiconductor Corporation
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
BZD27C51PHRQG
ดูรายละเอียด แผ่นข้อมูล

BZD27C51PHRQG Product Overview

Introduction

The BZD27C51PHRQG is a specialized electronic component designed for specific applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Voltage Regulation and Protection
  • Characteristics: High Precision, Low Power Dissipation
  • Package: SOD-123
  • Essence: Zener Diode
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage: 27V
  • Power Dissipation: 500mW
  • Tolerance: ±5%
  • Operating Temperature: -65°C to +150°C
  • Storage Temperature: -65°C to +175°C

Detailed Pin Configuration

The BZD27C51PHRQG has a standard SOD-123 package with two pins. Pin 1 is the cathode, and pin 2 is the anode.

Functional Features

  • Voltage Regulation: Provides stable 27V output under varying load conditions.
  • Overvoltage Protection: Safeguards connected circuits from voltage spikes.
  • Low Power Dissipation: Minimizes heat generation during operation.

Advantages and Disadvantages

Advantages

  • Precise Voltage Regulation
  • Compact SOD-123 Package
  • Wide Operating Temperature Range

Disadvantages

  • Relatively Low Power Dissipation Capability
  • Limited Tolerance Range

Working Principles

The BZD27C51PHRQG operates based on the reverse breakdown effect in a semiconductor junction. When the voltage across the diode reaches its specified value, it starts conducting in the reverse direction, maintaining a constant voltage drop across its terminals.

Detailed Application Field Plans

The BZD27C51PHRQG is suitable for various applications, including: - Voltage Regulation in Power Supplies - Overvoltage Protection in Electronic Circuits - Signal Clipping and Limiting

Detailed and Complete Alternative Models

  • BZX84C27: SOT-23 Package, 27V Zener Voltage
  • 1N4733A: DO-41 Package, 5.1V Zener Voltage
  • MM3Z27VT1G: SOD-323 Package, 27V Zener Voltage

In conclusion, the BZD27C51PHRQG is a reliable and precise Zener diode catering to voltage regulation and protection needs in various electronic applications.

Word Count: 344

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ BZD27C51PHRQG ในโซลูชันทางเทคนิค

  1. What is BZD27C51PHRQG?

    • BZD27C51PHRQG is a specific model or type of component, such as an integrated circuit, resistor, or capacitor, used in technical solutions.

  2. What are the key specifications of BZD27C51PHRQG?

    • The key specifications of BZD27C51PHRQG may include its voltage rating, current capacity, temperature range, package type, and other relevant electrical characteristics.

  3. How can BZD27C51PHRQG be integrated into a technical solution?

    • BZD27C51PHRQG can be integrated into a technical solution by following the manufacturer's datasheet and application notes, which provide guidance on proper usage and connections.

  4. What are the potential applications of BZD27C51PHRQG?

    • BZD27C51PHRQG can be used in various technical solutions, including power supplies, voltage regulation circuits, signal conditioning, and protection circuits.

  5. Are there any recommended operating conditions for BZD27C51PHRQG?

    • Yes, the manufacturer's datasheet typically provides recommended operating conditions, such as voltage levels, temperature ranges, and environmental considerations.

  6. What are the advantages of using BZD27C51PHRQG in technical solutions?

    • The advantages may include precise voltage regulation, low leakage current, high reliability, and compatibility with other components.

  7. Are there any common issues or limitations associated with BZD27C51PHRQG?

    • Common issues may include thermal considerations, voltage derating, and potential failure modes under certain conditions.

  8. How can BZD27C51PHRQG be tested for functionality and performance?

    • BZD27C51PHRQG can be tested using standard electrical testing equipment to verify its voltage regulation, current handling, and response to different operating conditions.

  9. What are the recommended storage and handling guidelines for BZD27C51PHRQG?

    • It is important to store BZD27C51PHRQG in appropriate packaging, protect it from electrostatic discharge, and follow any specific handling instructions provided by the manufacturer.

  10. Where can I find additional resources or support for using BZD27C51PHRQG in technical solutions?

    • Additional resources and support can be found on the manufacturer's website, through technical forums, and by consulting with experienced engineers or technicians familiar with the component.