รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
BZD27C62PHRVG

BZD27C62PHRVG

Product Category

BZD27C62PHRVG belongs to the category of Zener diodes.

Basic Information Overview

  • Category: Zener diode
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics:
    • Reverse breakdown voltage: 62V
    • Power dissipation: 500mW
    • Package type: DO-213AB (MELF)
  • Package: Tape and reel
  • Essence: Semiconductor device for voltage regulation
  • Packaging/Quantity: 5000 units per reel

Specifications

  • Reverse Breakdown Voltage: 62V
  • Power Dissipation: 500mW
  • Package Type: DO-213AB (MELF)
  • Package Quantity: 5000 units per reel

Detailed Pin Configuration

The BZD27C62PHRVG Zener diode has two pins, with the anode connected to one pin and the cathode connected to the other. The pinout configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Precise voltage regulation
  • Overvoltage protection
  • Low impedance
  • High reliability

Advantages

  • Accurate voltage regulation
  • Protection against voltage spikes
  • Compact package size
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation capability
  • Sensitive to temperature variations

Working Principles

The BZD27C62PHRVG Zener diode operates based on the principle of the Zener effect, where it maintains a constant voltage across its terminals when reverse biased. This allows it to regulate voltage and protect sensitive components in electronic circuits.

Detailed Application Field Plans

The BZD27C62PHRVG Zener diode finds applications in various electronic circuits, including: - Voltage regulators - Overvoltage protection circuits - Power supplies - Signal clamping circuits

Detailed and Complete Alternative Models

Some alternative models to BZD27C62PHRVG include: - BZX84C62 - 1N4729A - MMBZ27VCLT1G - P6SMB62CA

This completes the entry for BZD27C62PHRVG in the English editing encyclopedia format.

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ BZD27C62PHRVG ในโซลูชันทางเทคนิค

  1. What is BZD27C62PHRVG?

    • BZD27C62PHRVG is a specific part number for a semiconductor component, often used in electronic circuits and technical solutions.
  2. What are the key specifications of BZD27C62PHRVG?

    • The key specifications of BZD27C62PHRVG include its voltage rating, current rating, power dissipation, package type, and temperature range.
  3. How can BZD27C62PHRVG be used in technical solutions?

    • BZD27C62PHRVG can be used as a voltage regulator, transient voltage suppressor, or in other applications where precise voltage control or protection against voltage spikes is required.
  4. What are the typical applications of BZD27C62PHRVG?

    • Typical applications of BZD27C62PHRVG include power supplies, automotive electronics, industrial control systems, and consumer electronics.
  5. What are the advantages of using BZD27C62PHRVG in technical solutions?

    • The advantages of using BZD27C62PHRVG include its high reliability, low leakage current, fast response time, and compact package size.
  6. Are there any limitations or considerations when using BZD27C62PHRVG?

    • It's important to consider the maximum voltage and current ratings, thermal management, and compatibility with other components in the circuit when using BZD27C62PHRVG.
  7. How does BZD27C62PHRVG compare to similar components in terms of performance and cost?

    • BZD27C62PHRVG may offer better performance in terms of voltage regulation and transient suppression compared to similar components, but the cost may vary based on supplier and quantity.
  8. Can BZD27C62PHRVG be used in high-temperature environments?

    • BZD27C62PHRVG is designed to operate within a specified temperature range, so it's important to ensure that it is used within its rated temperature limits in high-temperature environments.
  9. Are there any recommended circuit designs or application notes for using BZD27C62PHRVG?

    • Manufacturers typically provide datasheets and application notes that offer guidance on circuit design, layout considerations, and best practices for using BZD27C62PHRVG.
  10. Where can I purchase BZD27C62PHRVG and what are the typical lead times?

    • BZD27C62PHRVG can be purchased from authorized distributors or directly from the manufacturer, and lead times may vary depending on availability and order quantity.