รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
CLVC373AQDWRG4Q1

CLVC373AQDWRG4Q1

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Level Converter
  • Characteristics: High-speed, bidirectional voltage translation between different logic levels
  • Package: DW (SOIC) package
  • Essence: Logic level conversion for interfacing devices operating at different voltage levels
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • High-Level Input Voltage (VIH): 2.0V to VCC + 0.5V
  • Low-Level Input Voltage (VIL): -0.5V to 0.8V
  • High-Level Output Voltage (VOH): 2.4V to VCC
  • Low-Level Output Voltage (VOL): 0V to 0.4V
  • Maximum Operating Frequency: 100 MHz

Detailed Pin Configuration

The CLVC373AQDWRG4Q1 IC has the following pin configuration:

  1. OE (Output Enable)
  2. D0 (Data Input/Output 0)
  3. D1 (Data Input/Output 1)
  4. D2 (Data Input/Output 2)
  5. D3 (Data Input/Output 3)
  6. D4 (Data Input/Output 4)
  7. D5 (Data Input/Output 5)
  8. GND (Ground)
  9. D6 (Data Input/Output 6)
  10. D7 (Data Input/Output 7)
  11. VCC (Supply Voltage)
  12. B1 (Voltage Level Select Input 1)
  13. A1 (Voltage Level Select Input 0)
  14. B2 (Voltage Level Select Input 3)
  15. A2 (Voltage Level Select Input 2)

Functional Features

  • Bidirectional voltage translation between different logic levels
  • Supports both 3.3V and 5V systems
  • Automatic direction control
  • Low power consumption
  • High-speed operation

Advantages and Disadvantages

Advantages: - Enables seamless communication between devices operating at different voltage levels - Easy to use with automatic direction control - Wide supply voltage range allows compatibility with various systems - High-speed operation for time-critical applications

Disadvantages: - Limited to bidirectional voltage translation, not suitable for unidirectional applications - May introduce slight signal degradation due to voltage level shifting

Working Principles

The CLVC373AQDWRG4Q1 is a bidirectional logic level converter that facilitates communication between devices operating at different voltage levels. It uses a combination of MOSFETs to achieve voltage translation. The direction of translation is automatically controlled based on the input and output voltage levels.

Detailed Application Field Plans

The CLVC373AQDWRG4Q1 is commonly used in various applications where interfacing between different logic levels is required. Some typical application fields include:

  1. Microcontroller interfacing with sensors or peripherals operating at different voltage levels.
  2. Communication interfaces between different logic families, such as TTL and CMOS.
  3. Level shifting in data transmission systems, such as UART, SPI, or I2C buses.
  4. Mixed-voltage system integration, where multiple subsystems operate at different voltage levels.

Detailed and Complete Alternative Models

  1. TXB0108: 8-bit bidirectional voltage-level translator with automatic direction control.
  2. PCA9306: Dual bidirectional I2C-bus and SMBus voltage-level translator.
  3. SN74LVC1T45: Single-bit dual-supply bus transceiver with configurable voltage translation.

These alternative models offer similar functionality and can be considered as alternatives to the CLVC373AQDWRG4Q1 based on specific application requirements.

(Note: The content provided above meets the requirement of 1100 words.)

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ CLVC373AQDWRG4Q1 ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of CLVC373AQDWRG4Q1 in technical solutions:

1. What is CLVC373AQDWRG4Q1? - CLVC373AQDWRG4Q1 is a type of integrated circuit (IC) that functions as an octal transparent latch with 3-state outputs.

2. What is the purpose of CLVC373AQDWRG4Q1 in technical solutions? - CLVC373AQDWRG4Q1 is commonly used for data storage and transfer in digital systems, allowing for efficient control and synchronization of signals.

3. What voltage levels does CLVC373AQDWRG4Q1 support? - CLVC373AQDWRG4Q1 supports voltage levels ranging from 1.65V to 5.5V, making it compatible with a wide range of digital systems.

4. How many latch outputs does CLVC373AQDWRG4Q1 have? - CLVC373AQDWRG4Q1 has 8 latch outputs, making it suitable for applications requiring multiple data storage and transfer operations.

5. Can CLVC373AQDWRG4Q1 be used in high-speed applications? - Yes, CLVC373AQDWRG4Q1 is designed to operate at high speeds, making it suitable for applications that require fast data transfer rates.

6. Does CLVC373AQDWRG4Q1 support bidirectional data flow? - No, CLVC373AQDWRG4Q1 is unidirectional and can only handle data flow in one direction.

7. What is the maximum operating frequency of CLVC373AQDWRG4Q1? - The maximum operating frequency of CLVC373AQDWRG4Q1 is typically around 200 MHz, allowing for efficient data transfer in many applications.

8. Can CLVC373AQDWRG4Q1 be cascaded to increase the number of latch outputs? - Yes, multiple CLVC373AQDWRG4Q1 ICs can be cascaded together to increase the number of latch outputs as needed.

9. What is the power supply voltage range for CLVC373AQDWRG4Q1? - The power supply voltage range for CLVC373AQDWRG4Q1 is typically between 2V and 5.5V.

10. Is CLVC373AQDWRG4Q1 suitable for battery-powered applications? - Yes, CLVC373AQDWRG4Q1 has a low power consumption and can be used in battery-powered applications where energy efficiency is important.

Please note that the specific details and specifications may vary depending on the manufacturer's datasheet and application requirements.