รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
DAC8830ICD

DAC8830ICD

Product Overview

Category: Integrated Circuit (IC)

Use: Digital-to-Analog Converter (DAC)

Characteristics: - High precision and accuracy - Low power consumption - Wide operating voltage range - Small form factor - Easy integration into various electronic systems

Package: DIP-16 (Dual In-Line Package with 16 pins)

Essence: The DAC8830ICD is a high-performance digital-to-analog converter that converts digital signals into analog voltages with exceptional precision and accuracy.

Packaging/Quantity: The DAC8830ICD is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Resolution: 16 bits
  • Output Voltage Range: 0V to Vref
  • Operating Voltage Range: 2.7V to 5.5V
  • Power Consumption: 1.5mW (typical)
  • Integral Nonlinearity (INL): ±1 LSB (maximum)
  • Differential Nonlinearity (DNL): ±0.5 LSB (maximum)
  • Settling Time: 10µs (typical)
  • Temperature Range: -40°C to +85°C

Pin Configuration

The DAC8830ICD has a total of 16 pins, which are assigned specific functions as follows:

  1. VDD: Positive power supply
  2. VREF: Reference voltage input
  3. AGND: Analog ground
  4. OUT: Analog output voltage
  5. A0-A15: Address inputs for selecting the desired digital input code
  6. CS: Chip select input
  7. SCLK: Serial clock input
  8. DIN: Serial data input
  9. LDAC: Load DAC input
  10. CLR: Clear input
  11. GND: Ground
  12. REFOUT: Reference voltage output
  13. VLOGIC: Logic power supply
  14. DGND: Digital ground
  15. SDO: Serial data output
  16. SYNC: Synchronization input

Functional Features

  • High-resolution digital-to-analog conversion
  • Low power consumption for energy-efficient operation
  • Wide operating voltage range allows compatibility with various systems
  • Fast settling time ensures quick response to input changes
  • Built-in reference voltage output simplifies system design
  • Serial interface for easy integration with microcontrollers and other digital devices

Advantages and Disadvantages

Advantages: - High precision and accuracy in converting digital signals to analog voltages - Low power consumption, making it suitable for battery-powered applications - Compact package size enables space-saving designs - Easy integration into various electronic systems due to its wide operating voltage range

Disadvantages: - Limited output voltage range compared to some other DACs - Relatively higher cost compared to lower-resolution DACs

Working Principles

The DAC8830ICD utilizes a 16-bit digital input code to generate an analog output voltage. It employs a resistor ladder network and a switching mechanism to convert the digital input into a corresponding analog voltage. The internal reference voltage sets the maximum output voltage, which can be adjusted by the user.

When a digital input code is received, the DAC8830ICD converts it into an analog voltage proportional to the input code. This analog voltage appears at the OUT pin and can be used as a precise control signal in various applications.

Detailed Application Field Plans

The DAC8830ICD finds applications in a wide range of fields, including:

  1. Audio Systems: Precise control of audio volume and tone adjustments.
  2. Industrial Automation: Accurate control of motor speed, position, and other parameters.
  3. Test and Measurement Equipment: Generation of precise analog signals for testing and calibration purposes.
  4. Communication Systems: Generation of analog control signals in wireless communication devices.
  5. Medical Instruments: Accurate control of medical equipment parameters, such as blood pressure monitors and infusion pumps.

Detailed and Complete Alternative Models

  1. DAC8830IDR: Similar to the DAC8830ICD but offered in a smaller SOIC-16 package.
  2. DAC8831ICDR: A higher-resolution version with 18-bit digital-to-analog conversion.
  3. DAC8832ICRGYR: Dual-channel version with two independent DACs in a QFN-24 package.

These alternative models offer similar functionality to the DAC8830ICD but may have different package options or additional features to suit specific application requirements.

Word count: 550 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ DAC8830ICD ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of DAC8830ICD in technical solutions:

  1. Q: What is DAC8830ICD? A: DAC8830ICD is a digital-to-analog converter (DAC) integrated circuit that converts digital signals into analog voltage outputs.

  2. Q: What is the operating voltage range of DAC8830ICD? A: The operating voltage range of DAC8830ICD is typically between 2.7V and 5.5V.

  3. Q: What is the resolution of DAC8830ICD? A: DAC8830ICD has a resolution of 16 bits, allowing for precise control over the analog output voltage.

  4. Q: How can I interface DAC8830ICD with a microcontroller or FPGA? A: DAC8830ICD uses a serial peripheral interface (SPI) for communication, making it easy to interface with microcontrollers or FPGAs.

  5. Q: Can DAC8830ICD be used in both single-ended and differential output configurations? A: Yes, DAC8830ICD supports both single-ended and differential output configurations, providing flexibility in various applications.

  6. Q: What is the maximum output voltage range of DAC8830ICD? A: The maximum output voltage range of DAC8830ICD is determined by the reference voltage provided to the device.

  7. Q: Does DAC8830ICD have any built-in features for signal conditioning? A: No, DAC8830ICD is a basic DAC without any built-in signal conditioning features. Additional external circuitry may be required for signal conditioning.

  8. Q: Can DAC8830ICD operate in a low-power mode? A: Yes, DAC8830ICD has a power-down mode that reduces power consumption when the device is not actively converting digital signals.

  9. Q: What is the settling time of DAC8830ICD? A: The settling time of DAC8830ICD refers to the time it takes for the output voltage to stabilize after a change in the digital input. It typically ranges from a few microseconds to tens of microseconds.

  10. Q: Are there any application notes or reference designs available for DAC8830ICD? A: Yes, the manufacturer of DAC8830ICD typically provides application notes and reference designs that can help with the integration and implementation of the device in various technical solutions.

Please note that these answers are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of DAC8830ICD.