รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
LM3447MTE/NOPB

LM3447MTE/NOPB

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Wide Input Voltage Range, Adjustable Output Voltage, Small Package Size
  • Package: TSSOP-14
  • Essence: Step-Down DC-DC Converter
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 75V
  • Output Voltage Range: 0.8V to 60V
  • Switching Frequency: 100kHz to 2MHz
  • Maximum Output Current: 1A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LM3447MTE/NOPB IC has a total of 14 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. SW: Switching node pin
  4. FB: Feedback pin
  5. EN: Enable pin
  6. VCC: Supply voltage pin
  7. AGND: Analog ground pin
  8. PGND: Power ground pin
  9. COMP: Compensation pin
  10. SS: Soft-start pin
  11. RT: Timing resistor pin
  12. CT: Timing capacitor pin
  13. NC: No connection
  14. NC: No connection

Functional Features

  • Step-down DC-DC converter with integrated power MOSFET
  • Wide input voltage range suitable for various applications
  • Adjustable output voltage through external resistors
  • High efficiency operation for reduced power dissipation
  • Over-temperature protection and current limit features
  • Soft-start function for controlled startup

Advantages and Disadvantages

Advantages

  • High efficiency operation saves power and reduces heat dissipation
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage provides flexibility in design
  • Small package size enables compact circuit designs
  • Over-temperature protection ensures safe operation

Disadvantages

  • Maximum output current limited to 1A
  • Limited switching frequency range compared to some other models
  • No built-in over-voltage protection feature

Working Principles

The LM3447MTE/NOPB is a step-down DC-DC converter that converts a higher input voltage to a lower output voltage. It utilizes a power MOSFET as the main switching element, which controls the energy transfer from the input to the output. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the switching signal to maintain a stable output voltage. The enable pin (EN) allows for easy on/off control of the converter.

Detailed Application Field Plans

The LM3447MTE/NOPB is commonly used in various applications, including:

  1. LED Lighting: The IC can be used to drive LED lighting systems efficiently, providing adjustable output voltages suitable for different LED configurations.
  2. Industrial Automation: It can be employed in industrial automation systems to power various components, such as sensors, actuators, and control circuits.
  3. Automotive Electronics: The wide input voltage range makes it suitable for automotive applications, where the input voltage can vary significantly.
  4. Telecommunications: The IC can be utilized in telecommunications equipment, such as routers and switches, to provide regulated power supplies.

Detailed and Complete Alternative Models

Some alternative models to the LM3447MTE/NOPB include:

  1. LM2596: A popular step-down DC-DC converter with similar features but a different package type.
  2. LT8610: A high-efficiency synchronous step-down DC-DC converter with a wider input voltage range.
  3. TPS5430: A compact step-down DC-DC converter with adjustable output voltage and integrated power MOSFET.

These alternative models offer similar functionality and can be considered based on specific requirements and design constraints.

Word count: 536 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ LM3447MTE/NOPB ในโซลูชันทางเทคนิค

  1. Question: What is the maximum input voltage for LM3447MTE/NOPB?
    Answer: The maximum input voltage for LM3447MTE/NOPB is 75V.

  2. Question: What is the typical output current capability of LM3447MTE/NOPB?
    Answer: The typical output current capability of LM3447MTE/NOPB is 1A.

  3. Question: Can LM3447MTE/NOPB be used in dimmable LED lighting applications?
    Answer: Yes, LM3447MTE/NOPB can be used in dimmable LED lighting applications.

  4. Question: What is the operating temperature range for LM3447MTE/NOPB?
    Answer: The operating temperature range for LM3447MTE/NOPB is -40°C to 125°C.

  5. Question: Does LM3447MTE/NOPB have overvoltage protection?
    Answer: Yes, LM3447MTE/NOPB has overvoltage protection.

  6. Question: What is the typical efficiency of LM3447MTE/NOPB?
    Answer: The typical efficiency of LM3447MTE/NOPB is 90%.

  7. Question: Can LM3447MTE/NOPB be used in automotive lighting applications?
    Answer: Yes, LM3447MTE/NOPB can be used in automotive lighting applications.

  8. Question: What is the recommended input capacitor value for LM3447MTE/NOPB?
    Answer: The recommended input capacitor value for LM3447MTE/NOPB is 10µF.

  9. Question: Is LM3447MTE/NOPB compatible with TRIAC dimmers?
    Answer: Yes, LM3447MTE/NOPB is compatible with TRIAC dimmers.

  10. Question: What is the typical frequency of the internal oscillator in LM3447MTE/NOPB?
    Answer: The typical frequency of the internal oscillator in LM3447MTE/NOPB is 100kHz.