รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
SN65HVD10QDRG4

SN65HVD10QDRG4

Product Overview

  • Category: Integrated Circuit
  • Use: Transceiver
  • Characteristics: High-speed, low-power, half-duplex communication
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Enables reliable data transmission over long distances in industrial applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 3V to 5.5V
  • Data Rate: Up to 1 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 8
  • Pin Pitch: 1.27mm

Detailed Pin Configuration

  1. VCC: Power supply pin
  2. GND: Ground pin
  3. RO: Receiver output pin
  4. DI: Driver input pin
  5. DE: Driver enable pin
  6. RE: Receiver enable pin
  7. RS: Receiver output short-circuit protection pin
  8. NC: No connection pin

Functional Features

  • Half-Duplex Communication: Allows bidirectional data transfer on a single communication line
  • Low Power Consumption: Optimized for battery-powered devices and energy-efficient applications
  • High-Speed Data Transmission: Supports data rates up to 1 Mbps
  • Robust Communication: Built-in protection against bus fault conditions and electromagnetic interference
  • Wide Supply Voltage Range: Operates from 3V to 5.5V, suitable for various power sources

Advantages and Disadvantages

Advantages: - Reliable and robust communication in industrial environments - Low power consumption extends battery life - High-speed data transmission for quick response times - Wide supply voltage range allows compatibility with different systems

Disadvantages: - Limited to half-duplex communication only - Requires external components for complete functionality - Not suitable for applications requiring full-duplex communication

Working Principles

The SN65HVD10QDRG4 is a half-duplex transceiver that enables reliable data transmission over long distances in industrial applications. It operates by converting the digital signals from the driver input (DI) into differential voltage signals on the bus line. The receiver output (RO) converts the received differential voltage signals back into digital signals.

The driver enable (DE) and receiver enable (RE) pins control the direction of data flow. When DE is high and RE is low, the device is in transmit mode, allowing data to be sent from DI to the bus. Conversely, when DE is low and RE is high, the device is in receive mode, enabling data reception at RO.

The RS pin provides short-circuit protection for the receiver output, preventing damage in case of a bus fault condition.

Detailed Application Field Plans

The SN65HVD10QDRG4 is widely used in various industrial applications, including:

  1. Factory Automation: Enables communication between sensors, actuators, and control systems in automated manufacturing processes.
  2. Building Automation: Facilitates data exchange between different building systems, such as HVAC, lighting, and security systems.
  3. Automotive Electronics: Supports communication between different electronic modules in vehicles, such as engine control units, airbag systems, and infotainment systems.
  4. Energy Management Systems: Allows monitoring and control of energy consumption in smart grid systems and renewable energy installations.
  5. Medical Devices: Provides reliable data transmission in medical equipment, such as patient monitors, infusion pumps, and diagnostic devices.

Detailed and Complete Alternative Models

  1. MAX485: Similar half-duplex transceiver with higher data rate capability.
  2. LTC2862: Low-power half-duplex transceiver with extended temperature range.
  3. SN65HVD11: Full-duplex transceiver with similar characteristics and package.

(Note: The above alternative models are provided for reference and may have different specifications and pin configurations. Please refer to the respective datasheets for detailed information.)

This entry provides an overview of the SN65HVD10QDRG4 transceiver, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ SN65HVD10QDRG4 ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of SN65HVD10QDRG4 in technical solutions:

  1. Question: What is SN65HVD10QDRG4?
    - Answer: SN65HVD10QDRG4 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus.

  2. Question: What is the operating voltage range of SN65HVD10QDRG4?
    - Answer: The operating voltage range of SN65HVD10QDRG4 is from 3.3V to 5V.

  3. Question: What is the maximum data rate supported by SN65HVD10QDRG4?
    - Answer: SN65HVD10QDRG4 supports a maximum data rate of 1 Mbps.

  4. Question: Can SN65HVD10QDRG4 be used in automotive applications?
    - Answer: Yes, SN65HVD10QDRG4 is suitable for automotive applications as it meets the requirements of the Automotive Electronics Council (AEC-Q100).

  5. Question: Does SN65HVD10QDRG4 have built-in protection features?
    - Answer: Yes, SN65HVD10QDRG4 has built-in protection features such as thermal shutdown, undervoltage lockout, and bus fault protection.

  6. Question: Can SN65HVD10QDRG4 be used in industrial automation systems?
    - Answer: Yes, SN65HVD10QDRG4 is commonly used in industrial automation systems due to its robustness and reliability.

  7. Question: What is the typical supply current of SN65HVD10QDRG4?
    - Answer: The typical supply current of SN65HVD10QDRG4 is around 8 mA.

  8. Question: Can SN65HVD10QDRG4 be used in multi-node CAN networks?
    - Answer: Yes, SN65HVD10QDRG4 can be used in multi-node CAN networks as it supports up to 32 nodes on the bus.

  9. Question: Does SN65HVD10QDRG4 support extended temperature range operation?
    - Answer: Yes, SN65HVD10QDRG4 is designed to operate over an extended temperature range of -40°C to +125°C.

  10. Question: What package options are available for SN65HVD10QDRG4?
    - Answer: SN65HVD10QDRG4 is available in a small-outline integrated circuit (SOIC) package with 8 pins.

Please note that these answers are general and may vary depending on the specific application and requirements.