The SN74ALS374ADWRG4 is a D-type transparent latch that stores data on the rising edge of the clock signal. When the clock enable (CLK) input is high, the latch transfers the data from the input pins (D0-D7) to the corresponding output pins (Q0-Q7). The latch can be disabled by setting the output enable (OE) pin low, which puts all the outputs in a high-impedance state.
The SN74ALS374ADWRG4 is commonly used in various digital systems where data storage and synchronization are required. Some specific application fields include:
These alternative models offer similar functionality and can be used as substitutes for the SN74ALS374ADWRG4 in different applications.
Word count: 389 words
Sure! Here are 10 common questions and answers related to the application of SN74ALS374ADWRG4 in technical solutions:
Q: What is the SN74ALS374ADWRG4? A: The SN74ALS374ADWRG4 is a octal D-type flip-flop with 3-state outputs, commonly used in digital circuits.
Q: What is the maximum operating voltage for SN74ALS374ADWRG4? A: The maximum operating voltage for SN74ALS374ADWRG4 is 5.5V.
Q: How many flip-flops are there in SN74ALS374ADWRG4? A: SN74ALS374ADWRG4 consists of 8 individual D-type flip-flops.
Q: What is the output current capability of SN74ALS374ADWRG4? A: The output current capability of SN74ALS374ADWRG4 is typically 24mA.
Q: Can SN74ALS374ADWRG4 be used in both synchronous and asynchronous applications? A: Yes, SN74ALS374ADWRG4 can be used in both synchronous and asynchronous applications.
Q: What is the propagation delay of SN74ALS374ADWRG4? A: The propagation delay of SN74ALS374ADWRG4 is typically 9ns.
Q: Is SN74ALS374ADWRG4 compatible with TTL logic levels? A: Yes, SN74ALS374ADWRG4 is compatible with TTL logic levels.
Q: Can SN74ALS374ADWRG4 drive LEDs directly? A: No, SN74ALS374ADWRG4 cannot drive LEDs directly. It requires additional current-limiting resistors.
Q: What is the temperature range for SN74ALS374ADWRG4? A: The temperature range for SN74ALS374ADWRG4 is -40°C to 85°C.
Q: Can SN74ALS374ADWRG4 be used in high-speed applications? A: Yes, SN74ALS374ADWRG4 can be used in high-speed applications as it has a maximum toggle frequency of 100MHz.
Please note that these answers are general and may vary depending on the specific application and datasheet of SN74ALS374ADWRG4.