Texas Instruments
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
TLV5618AID
ดูรายละเอียด แผ่นข้อมูล

TLV5618AID

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital-to-Analog Converter (DAC)
  • Characteristics: High-resolution, low-power consumption
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Converts digital signals into analog voltage outputs
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Resolution: 12 bits
  • Number of Channels: 1
  • Supply Voltage Range: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Output Voltage Range: 0V to Vref
  • Power Consumption: 0.6mW (typical)

Pin Configuration

The TLV5618AID has the following pin configuration:

``` ┌───┬───┐ │ 1 │ 8 │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ TLV5618AID ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of TLV5618AID:

  1. Q: What is TLV5618AID? A: TLV5618AID is a digital-to-analog converter (DAC) chip that converts digital signals into analog voltage outputs.

  2. Q: What is the operating voltage range of TLV5618AID? A: The operating voltage range of TLV5618AID is typically between 2.7V and 5.5V.

  3. Q: How many channels does TLV5618AID have? A: TLV5618AID has 8 channels, which means it can simultaneously convert 8 digital inputs into analog voltage outputs.

  4. Q: What is the resolution of TLV5618AID? A: TLV5618AID has a resolution of 12 bits, which means it can represent analog voltages with a precision of 1 part in 4096.

  5. Q: Can TLV5618AID operate in both single-ended and differential mode? A: Yes, TLV5618AID can be configured to operate in either single-ended or differential mode, depending on the application requirements.

  6. Q: What is the maximum output voltage range of TLV5618AID? A: The maximum output voltage range of TLV5618AID is determined by the reference voltage applied to its VREF pin. It can be set between 0V and VREF.

  7. Q: Does TLV5618AID have built-in power-on reset circuitry? A: Yes, TLV5618AID has a power-on reset circuit that ensures the DAC outputs are initialized to zero volts upon power-up.

  8. Q: Can TLV5618AID operate in both buffered and unbuffered mode? A: Yes, TLV5618AID can be operated in either buffered or unbuffered mode, depending on the application requirements.

  9. Q: What is the maximum settling time of TLV5618AID? A: The maximum settling time of TLV5618AID is typically around 10 microseconds, which means it takes this much time for the output voltage to stabilize after a change in the digital input.

  10. Q: Is TLV5618AID suitable for precision applications? A: TLV5618AID is a general-purpose DAC and may not be suitable for high-precision applications that require extremely low noise or high accuracy. However, it can still be used in many industrial and consumer applications where moderate precision is sufficient.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.