รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
TPS61121RSARG4

TPS61121RSARG4

Product Overview

Category

The TPS61121RSARG4 belongs to the category of integrated circuits (ICs) and specifically falls under the category of boost converters.

Use

This product is primarily used for voltage boosting applications, where it efficiently steps up the input voltage to a higher output voltage level.

Characteristics

  • High efficiency: The TPS61121RSARG4 offers high conversion efficiency, ensuring minimal power loss during voltage boosting.
  • Wide input voltage range: It can accept a wide range of input voltages, making it suitable for various applications.
  • Adjustable output voltage: The output voltage can be adjusted according to the specific requirements of the application.
  • Low quiescent current: The device has a low quiescent current, reducing power consumption when not in active operation.

Package

The TPS61121RSARG4 is available in a small outline package (SOP) with a thermal pad, allowing for efficient heat dissipation.

Essence

The essence of the TPS61121RSARG4 lies in its ability to efficiently boost input voltages to higher levels, enabling the successful operation of devices that require higher voltage levels than the available input.

Packaging/Quantity

The TPS61121RSARG4 is typically packaged in reels or tubes, containing a specified quantity of ICs per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Input Voltage Range: 2.7V to 18V
  • Output Voltage Range: Adjustable from 3.3V to 30V
  • Switching Frequency: Up to 1.2MHz
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TPS61121RSARG4 features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground reference pin
  3. FB: Feedback pin for output voltage regulation
  4. EN: Enable pin to control the device's operation
  5. SW: Switching node pin for connecting the inductor
  6. LX: Inductor connection pin
  7. PGND: Power ground pin
  8. VOUT: Output voltage pin

Functional Features

  • Soft start: The TPS61121RSARG4 incorporates a soft start feature, gradually ramping up the output voltage upon startup to prevent excessive current flow.
  • Overcurrent protection: The device includes overcurrent protection, safeguarding against excessive current draw and potential damage to the circuit.
  • Thermal shutdown: In case of excessive temperature rise, the TPS61121RSARG4 activates thermal shutdown to protect itself from overheating.

Advantages and Disadvantages

Advantages

  • High efficiency conversion
  • Wide input voltage range
  • Adjustable output voltage
  • Low quiescent current
  • Compact package with thermal pad for efficient heat dissipation

Disadvantages

  • Limited maximum output voltage (up to 30V)
  • Requires external components for proper operation

Working Principles

The TPS61121RSARG4 operates as a boost converter, utilizing an inductor and a switching transistor to step up the input voltage. When enabled, the device controls the switching transistor to rapidly switch the input voltage across the inductor. This action stores energy in the inductor during the "on" state and releases it during the "off" state, resulting in an increased output voltage.

Detailed Application Field Plans

The TPS61121RSARG4 finds applications in various fields, including but not limited to: - Battery-powered devices requiring higher voltage levels - LED backlighting for LCD displays - Portable audio systems - Industrial automation equipment - Automotive electronics

Detailed and Complete Alternative Models

  1. TPS61122RSARG4: Similar to the TPS61121RSARG4, but with a higher maximum output voltage of 40V.
  2. TPS61123RSARG4: A variant with additional features such as adjustable switching frequency and synchronization capability.
  3. TPS61124RSARG4: Offers enhanced efficiency and lower quiescent current compared to the TPS61121RSARG4.

(Note: The above alternative models are for illustrative purposes only and may not represent an exhaustive list of alternatives.)

Word count: 550 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ TPS61121RSARG4 ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of TPS61121RSARG4 in technical solutions:

  1. Q: What is the TPS61121RSARG4? A: The TPS61121RSARG4 is a boost converter IC (integrated circuit) designed for driving white LEDs in backlight applications.

  2. Q: What is the input voltage range of TPS61121RSARG4? A: The input voltage range of TPS61121RSARG4 is typically between 2.7V and 18V.

  3. Q: What is the maximum output current that TPS61121RSARG4 can handle? A: TPS61121RSARG4 can handle a maximum output current of up to 30mA.

  4. Q: Can TPS61121RSARG4 be used to drive RGB LEDs? A: No, TPS61121RSARG4 is specifically designed for driving white LEDs and may not be suitable for driving RGB LEDs.

  5. Q: Does TPS61121RSARG4 have built-in over-temperature protection? A: Yes, TPS61121RSARG4 has built-in thermal shutdown protection to prevent overheating.

  6. Q: Can TPS61121RSARG4 operate in dimming mode? A: Yes, TPS61121RSARG4 supports PWM (Pulse Width Modulation) dimming control for adjusting the brightness of the LEDs.

  7. Q: What is the typical efficiency of TPS61121RSARG4? A: The typical efficiency of TPS61121RSARG4 is around 85% to 90%, depending on the operating conditions.

  8. Q: Is TPS61121RSARG4 suitable for battery-powered applications? A: Yes, TPS61121RSARG4 is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  9. Q: Can TPS61121RSARG4 handle high voltage transients? A: Yes, TPS61121RSARG4 has built-in protection features to withstand high voltage transients and prevent damage to the IC.

  10. Q: What package does TPS61121RSARG4 come in? A: TPS61121RSARG4 is available in a small outline SOT-23-6 package, which is compact and suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific application and operating conditions. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.