Torex Semiconductor Ltd
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
XC6108C11DGR-G
ดูรายละเอียด แผ่นข้อมูล

XC6108C11DGR-G

Product Overview

Category

XC6108C11DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6108C11DGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: The regulator consumes minimal current when no load is connected.
  • Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.

Package

XC6108C11DGR-G is available in a small surface-mount package.

Essence

The essence of XC6108C11DGR-G lies in its ability to provide reliable and stable voltage regulation for electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 1.1V
  • Maximum output current: 100mA
  • Dropout voltage: 200mV (at 50mA)
  • Quiescent current: 30μA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6108C11DGR-G has the following pin configuration:

  1. VIN (Input voltage)
  2. GND (Ground)
  3. VOUT (Output voltage)

Functional Features

  • Voltage regulation: XC6108C11DGR-G maintains a constant output voltage regardless of changes in the input voltage or load conditions.
  • Low dropout voltage: It can operate with a very small voltage difference between the input and output, ensuring efficient power conversion.
  • Low quiescent current: The regulator consumes minimal current when no load is connected, reducing power consumption.
  • Thermal shutdown protection: It automatically shuts down if the temperature exceeds a certain threshold, protecting the device from overheating.

Advantages and Disadvantages

Advantages

  • Stable output voltage regulation
  • Low dropout voltage for efficient operation
  • Low quiescent current for reduced power consumption
  • Thermal shutdown protection for device safety

Disadvantages

  • Limited maximum output current (100mA)
  • Narrow input voltage range (2.5V - 6.0V)

Working Principles

XC6108C11DGR-G utilizes internal circuitry to compare the output voltage with a reference voltage. It adjusts the pass transistor's resistance to maintain a constant output voltage. This feedback mechanism ensures stable voltage regulation.

Detailed Application Field Plans

XC6108C11DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that provide similar functionality to XC6108C11DGR-G are: - LM1117-1.1 - MCP1701-1102E/TO - TPS78230DDCR

These models offer comparable voltage regulation and characteristics suitable for various electronic applications.

Word count: 410 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ XC6108C11DGR-G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of XC6108C11DGR-G in technical solutions:

  1. Q: What is XC6108C11DGR-G? A: XC6108C11DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C11DGR-G? A: The operating voltage range of XC6108C11DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C11DGR-G help in technical solutions? A: XC6108C11DGR-G helps in technical solutions by ensuring proper operation and reliability of electronic devices by monitoring the power supply voltage and providing a reset signal when necessary.

  4. Q: Can XC6108C11DGR-G be used in battery-powered applications? A: Yes, XC6108C11DGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  5. Q: What is the typical reset threshold voltage of XC6108C11DGR-G? A: The typical reset threshold voltage of XC6108C11DGR-G is 1.1V.

  6. Q: Is XC6108C11DGR-G suitable for use in automotive applications? A: Yes, XC6108C11DGR-G is suitable for use in automotive applications as it meets the required automotive standards and has a wide operating temperature range.

  7. Q: Does XC6108C11DGR-G have any built-in delay time for the reset signal? A: Yes, XC6108C11DGR-G has a built-in delay time of approximately 200ms to ensure stable operation during power-up.

  8. Q: Can XC6108C11DGR-G be used in low-power applications? A: Yes, XC6108C11DGR-G is suitable for low-power applications as it consumes very low quiescent current (typically around 1.0µA).

  9. Q: What is the package type of XC6108C11DGR-G? A: XC6108C11DGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Q: Are there any application notes or reference designs available for XC6108C11DGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help in understanding and implementing XC6108C11DGR-G in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6108C11DGR-G.