Torex Semiconductor Ltd
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
XC6108C16CGR-G
ดูรายละเอียด แผ่นข้อมูล

XC6108C16CGR-G

Product Overview

Category

XC6108C16CGR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact package size
  • Low power consumption
  • High efficiency

Package

XC6108C16CGR-G is available in a small form factor package, which ensures easy integration into various electronic devices.

Essence

The essence of XC6108C16CGR-G lies in its ability to regulate voltage and manage power efficiently, making it an essential component in electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a specific quantity per package depending on the manufacturer's specifications.

Specifications

  • Model: XC6108C16CGR-G
  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.6V
  • Maximum Output Current: 100mA
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

XC6108C16CGR-G has a total of five pins arranged as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108C16CGR-G ensures a stable output voltage of 1.6V regardless of input voltage fluctuations.
  • Power management: This IC efficiently manages power consumption, reducing energy waste.
  • Enable pin: The EN pin allows for easy control of the device's operation.
  • Feedback pin: The FB pin provides feedback to regulate the output voltage accurately.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • Low power consumption helps prolong battery life in portable devices.
  • High efficiency ensures minimal energy loss during voltage regulation.
  • Wide input voltage range makes it compatible with different power sources.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

XC6108C16CGR-G operates based on a voltage regulation principle known as a linear regulator. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage of 1.6V.

Detailed Application Field Plans

XC6108C16CGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C16CGR-G are: - XC6206P162MR-G - LM1117IMPX-1.6/NOPB - MCP1700T-1602E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 411

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ XC6108C16CGR-G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of XC6108C16CGR-G in technical solutions:

  1. Q: What is XC6108C16CGR-G? A: XC6108C16CGR-G is a voltage detector IC (Integrated Circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6108C16CGR-G? A: The operating voltage range of XC6108C16CGR-G is from 0.9V to 6.0V.

  3. Q: What is the output type of XC6108C16CGR-G? A: XC6108C16CGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different functionalities.

  4. Q: What is the typical quiescent current consumption of XC6108C16CGR-G? A: The typical quiescent current consumption of XC6108C16CGR-G is 1.0µA, making it suitable for low-power applications.

  5. Q: Can XC6108C16CGR-G detect both overvoltage and undervoltage conditions? A: No, XC6108C16CGR-G is specifically designed to detect undervoltage conditions only.

  6. Q: What is the detection voltage threshold of XC6108C16CGR-G? A: The detection voltage threshold of XC6108C16CGR-G is fixed at 1.6V.

  7. Q: Does XC6108C16CGR-G have any built-in delay circuitry? A: Yes, XC6108C16CGR-G has a built-in delay circuitry of approximately 200ms to prevent false detections caused by voltage fluctuations.

  8. Q: Can XC6108C16CGR-G be used in automotive applications? A: Yes, XC6108C16CGR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability.

  9. Q: What is the package type of XC6108C16CGR-G? A: XC6108C16CGR-G is available in a compact SOT-25 package, which is small and easy to mount on PCBs.

  10. Q: Are there any application notes or reference designs available for XC6108C16CGR-G? A: Yes, Torex Semiconductor provides application notes and reference designs on their website, which can help users understand and implement XC6108C16CGR-G in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.