Torex Semiconductor Ltd
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
XC6108N27BGR-G
ดูรายละเอียด แผ่นข้อมูล

XC6108N27BGR-G

Product Overview

Category

XC6108N27BGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108N27BGR-G is available in a small surface-mount package.

Essence

The essence of XC6108N27BGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6108N27BGR-G is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.7V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108N27BGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various circuit designs.
  • Low power consumption helps conserve energy.
  • Stable voltage output ensures reliable performance of connected devices.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6108N27BGR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6108N27BGR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. XC6206P332MR-G: Similar voltage regulator with a different output voltage (3.3V).
  2. XC6220B332MR-G: Voltage regulator with a higher output current capability (up to 500mA).
  3. XC6219B272MR-G: Voltage regulator with a lower dropout voltage (100mV).

These alternative models provide flexibility in choosing the appropriate voltage regulator based on specific requirements.

Word count: 410 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ XC6108N27BGR-G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of XC6108N27BGR-G in technical solutions:

  1. Q: What is XC6108N27BGR-G? A: XC6108N27BGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108N27BGR-G? A: The operating voltage range of XC6108N27BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N27BGR-G work? A: XC6108N27BGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the output type of XC6108N27BGR-G? A: XC6108N27BGR-G has an open-drain output type, which requires an external pull-up resistor.

  5. Q: What is the typical quiescent current consumption of XC6108N27BGR-G? A: The typical quiescent current consumption of XC6108N27BGR-G is around 1.0µA.

  6. Q: Can XC6108N27BGR-G be used in battery-powered applications? A: Yes, XC6108N27BGR-G's low quiescent current makes it suitable for battery-powered applications where power efficiency is crucial.

  7. Q: What is the reset delay time of XC6108N27BGR-G? A: The reset delay time of XC6108N27BGR-G is typically 200ms, ensuring stable power supply before releasing the reset signal.

  8. Q: Is XC6108N27BGR-G compatible with both CMOS and TTL logic levels? A: Yes, XC6108N27BGR-G is compatible with both CMOS (0V to VDD) and TTL (0V to 2.4V) logic levels.

  9. Q: Can XC6108N27BGR-G withstand high temperatures? A: XC6108N27BGR-G has a maximum operating temperature of 125°C, making it suitable for various industrial applications.

  10. Q: Are there any additional features or protections provided by XC6108N27BGR-G? A: Yes, XC6108N27BGR-G includes features like hysteresis, overcurrent protection, and reverse voltage protection, enhancing its reliability in different scenarios.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.