รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
XC6108N42AGR-G

XC6108N42AGR-G

Product Overview

Category

XC6108N42AGR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 100mA
  • Low Dropout Voltage: 150mV at 50mA
  • Low Quiescent Current: 30µA (typical)
  • Thermal Shutdown Protection
  • Short Circuit Protection

Package

XC6108N42AGR-G comes in a small SOT-23-5 package.

Essence

The essence of XC6108N42AGR-G is its ability to provide stable and regulated voltage for various electronic devices.

Packaging/Quantity

XC6108N42AGR-G is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 150mV at 50mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

XC6108N42AGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection
  5. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6108N42AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It maintains a low voltage drop between the input and output, minimizing power dissipation.
  • Thermal shutdown protection: The device shuts down when the temperature exceeds a certain threshold, preventing damage.
  • Short circuit protection: XC6108N42AGR-G safeguards against excessive current flow during a short circuit.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows compatibility with various power sources.
  • Low quiescent current minimizes power consumption in standby mode.
  • Small package size enables space-saving designs.
  • Thermal shutdown and short circuit protection enhance reliability.

Disadvantages

  • Maximum output current of 100mA may limit its use in high-power applications.
  • Limited output voltage range may not meet the requirements of certain devices.

Working Principles

XC6108N42AGR-G is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to achieve the desired output voltage. The device regulates the voltage by controlling the current flow through a series pass transistor.

Detailed Application Field Plans

XC6108N42AGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to XC6108N42AGR-G include: - XC6206P332MR-G - XC6210B332MR-G - XC6220B332MR-G - XC6230B332MR-G - XC6240B332MR-G

These models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 455 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ XC6108N42AGR-G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of XC6108N42AGR-G in technical solutions:

  1. Question: What is XC6108N42AGR-G?
    - Answer: XC6108N42AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6108N42AGR-G?
    - Answer: The operating voltage range of XC6108N42AGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6108N42AGR-G help in technical solutions?
    - Answer: XC6108N42AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: Can XC6108N42AGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108N42AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  5. Question: What is the output type of XC6108N42AGR-G?
    - Answer: XC6108N42AGR-G has an open-drain output, which means it can be connected to other devices with different voltage levels.

  6. Question: What is the typical reset threshold voltage of XC6108N42AGR-G?
    - Answer: The typical reset threshold voltage of XC6108N42AGR-G is 4.2V.

  7. Question: Does XC6108N42AGR-G have a built-in delay time?
    - Answer: Yes, XC6108N42AGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: Can XC6108N42AGR-G be used in automotive applications?
    - Answer: Yes, XC6108N42AGR-G is AEC-Q100 qualified and can be used in automotive applications that require reliable voltage monitoring and reset functionality.

  9. Question: What is the package type of XC6108N42AGR-G?
    - Answer: XC6108N42AGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Question: Is XC6108N42AGR-G RoHS compliant?
    - Answer: Yes, XC6108N42AGR-G is RoHS compliant, ensuring it meets environmental regulations regarding hazardous substances.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108N42AGR-G.