รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
XC6122C326MR-G

XC6122C326MR-G

Product Overview

Category

XC6122C326MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High precision
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122C326MR-G comes in a small surface-mount package.

Essence

The essence of XC6122C326MR-G is its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

XC6122C326MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 1.0µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C326MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6122C326MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current to a safe level during overcurrent conditions.
  • Thermal shutdown protection: In case of excessive temperature, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High precision ensures accurate voltage regulation.
  • Low power consumption helps conserve energy.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122C326MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The device continuously monitors the input and output voltages, making necessary adjustments to ensure the desired output voltage is maintained.

Detailed Application Field Plans

XC6122C326MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Industrial automation systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C326MR-G are: - LM317: A popular linear voltage regulator with adjustable output voltage. - LT1763: A low dropout (LDO) voltage regulator with high precision and low quiescent current. - TPS7A4700: An ultra-low noise LDO voltage regulator suitable for sensitive audio applications.

These alternative models offer similar functionality and can be chosen based on specific requirements and design constraints.

Word count: 411 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ XC6122C326MR-G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of XC6122C326MR-G in technical solutions:

  1. Question: What is XC6122C326MR-G?
    - Answer: XC6122C326MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122C326MR-G?
    - Answer: The operating voltage range of XC6122C326MR-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6122C326MR-G?
    - Answer: XC6122C326MR-G has an open-drain output type, which means it can be connected to other devices or circuits to indicate the status of the monitored voltage.

  4. Question: What is the typical quiescent current consumption of XC6122C326MR-G?
    - Answer: The typical quiescent current consumption of XC6122C326MR-G is very low, around 1.0µA.

  5. Question: Can XC6122C326MR-G be used for overvoltage protection?
    - Answer: No, XC6122C326MR-G is not designed for overvoltage protection. It is primarily used for undervoltage detection.

  6. Question: What is the accuracy of the voltage detection threshold in XC6122C326MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6122C326MR-G is typically ±1.5%.

  7. Question: Is XC6122C326MR-G suitable for battery-powered applications?
    - Answer: Yes, XC6122C326MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  8. Question: Can XC6122C326MR-G be used in automotive applications?
    - Answer: Yes, XC6122C326MR-G is AEC-Q100 qualified and can be used in automotive applications that require voltage monitoring.

  9. Question: What is the temperature range of operation for XC6122C326MR-G?
    - Answer: The temperature range of operation for XC6122C326MR-G is typically from -40°C to +85°C.

  10. Question: How is XC6122C326MR-G typically packaged?
    - Answer: XC6122C326MR-G is typically packaged in a small SOT-25 package, which is a surface-mount package with 5 pins.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.