Torex Semiconductor Ltd
รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
XC6122D316ER-G
ดูรายละเอียด แผ่นข้อมูล

XC6122D316ER-G

Product Overview

Category

XC6122D316ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

XC6122D316ER-G is available in a small surface-mount package.

Essence

The essence of XC6122D316ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

XC6122D316ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.16V
  • Output Current: 200mA (maximum)
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D316ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6122D316ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Low power consumption: The regulator consumes minimal power during operation.
  • Thermal shutdown: It includes thermal shutdown protection to prevent overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Wide input voltage range enables compatibility with various power sources.
  • High efficiency results in minimal power loss.
  • Overcurrent protection ensures the safety of connected devices.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122D316ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any input voltage variations.

Detailed Application Field Plans

XC6122D316ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122D316ER-G are: - XC6206P316MR-G - LM317T - LT1763

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 346 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ XC6122D316ER-G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of XC6122D316ER-G in technical solutions:

  1. Q: What is XC6122D316ER-G? A: XC6122D316ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6122D316ER-G? A: The operating voltage range of XC6122D316ER-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6122D316ER-G work? A: XC6122D316ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal to indicate the voltage status.

  4. Q: What is the output type of XC6122D316ER-G? A: XC6122D316ER-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Q: What is the typical quiescent current consumption of XC6122D316ER-G? A: The typical quiescent current consumption of XC6122D316ER-G is very low, usually around 1.0µA.

  6. Q: Can XC6122D316ER-G be used for undervoltage and overvoltage detection? A: Yes, XC6122D316ER-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  7. Q: What is the accuracy of XC6122D316ER-G? A: The accuracy of XC6122D316ER-G is typically ±1.5% at room temperature.

  8. Q: Can XC6122D316ER-G be used in automotive applications? A: Yes, XC6122D316ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Q: Does XC6122D316ER-G have built-in hysteresis? A: Yes, XC6122D316ER-G has a built-in hysteresis function to prevent output oscillation near the threshold voltage.

  10. Q: What is the package type of XC6122D316ER-G? A: XC6122D316ER-G is available in a small SOT-23-3 package, which is commonly used for surface-mount applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.