รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
XC61CC1602MR-G

XC61CC1602MR-G

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Detector
  • Characteristics: Low Power Consumption, High Accuracy, Small Package Size
  • Package: SOT-23-5
  • Essence: Monolithic CMOS Voltage Detector
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Supply Voltage Range: 1.6V to 6.0V
  • Detection Voltage Accuracy: ±2%
  • Operating Current: 1.0μA (typical)
  • Output Configuration: N-channel Open Drain
  • Threshold Voltage Options: Various options available
  • Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC61CC1602MR-G has a total of 5 pins:

  1. VDD: Supply Voltage Input
  2. GND: Ground
  3. OUT: Output Pin
  4. EN: Enable Pin
  5. VIN: Voltage Detection Threshold Setting Pin

Functional Features

  • Monitors the input voltage and provides an output signal when it falls below a certain threshold.
  • Low power consumption makes it suitable for battery-powered applications.
  • Wide supply voltage range allows for versatile use in different systems.
  • High accuracy ensures reliable voltage detection.

Advantages

  • Small package size enables space-saving designs.
  • Low operating current prolongs battery life.
  • Multiple threshold voltage options provide flexibility for different voltage level requirements.
  • Wide temperature range allows for operation in various environments.

Disadvantages

  • Limited number of pins may restrict additional functionality.
  • Lack of built-in hysteresis may result in oscillation near the detection threshold.

Working Principles

The XC61CC1602MR-G is based on a monolithic CMOS voltage detector circuit. It continuously monitors the input voltage and compares it to a pre-set threshold voltage. When the input voltage falls below this threshold, the output pin is activated, indicating a low voltage condition.

Detailed Application Field Plans

The XC61CC1602MR-G is commonly used in various applications, including:

  1. Battery-Powered Devices: Provides low voltage detection for battery monitoring systems.
  2. Power Management: Ensures proper power supply voltage levels in electronic circuits.
  3. Automotive Electronics: Monitors voltage levels in automotive systems to prevent damage due to low voltage conditions.
  4. Industrial Control Systems: Detects voltage drops in control circuits to trigger appropriate actions.

Detailed and Complete Alternative Models

  1. XC61CC1602MR-G-XX: Same specifications with different threshold voltage options.
  2. XC61CC1602NR-G: Similar voltage detector with an active-high output configuration.
  3. XC61CC1602ML-G: Package variant with a smaller footprint (SOT-23-3).

Note: This is not an exhaustive list of alternative models. Please refer to the manufacturer's datasheet for a complete list of available options.

Word count: 389 words

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ XC61CC1602MR-G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of XC61CC1602MR-G in technical solutions:

  1. Question: What is XC61CC1602MR-G?
    - Answer: XC61CC1602MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used for monitoring and detecting voltage levels in various electronic applications.

  2. Question: What is the operating voltage range of XC61CC1602MR-G?
    - Answer: The operating voltage range of XC61CC1602MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC61CC1602MR-G work?
    - Answer: XC61CC1602MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage exceeds or falls below the reference voltage, the output of the IC changes state, indicating the detection of overvoltage or undervoltage conditions.

  4. Question: What is the output configuration of XC61CC1602MR-G?
    - Answer: XC61CC1602MR-G has an open-drain output configuration, which means it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.

  5. Question: What is the typical quiescent current consumption of XC61CC1602MR-G?
    - Answer: The typical quiescent current consumption of XC61CC1602MR-G is very low, usually around 1.0µA.

  6. Question: Can XC61CC1602MR-G be used for both overvoltage and undervoltage detection?
    - Answer: Yes, XC61CC1602MR-G can be used for both overvoltage and undervoltage detection. It has a built-in voltage reference that can be configured to detect either high or low voltage conditions.

  7. Question: What is the response time of XC61CC1602MR-G?
    - Answer: The response time of XC61CC1602MR-G is typically very fast, usually within microseconds.

  8. Question: Can XC61CC1602MR-G be used in battery-powered applications?
    - Answer: Yes, XC61CC1602MR-G can be used in battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  9. Question: Is XC61CC1602MR-G suitable for automotive applications?
    - Answer: Yes, XC61CC1602MR-G is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 qualification and has a wide operating temperature range.

  10. Question: Are there any specific precautions to consider when using XC61CC1602MR-G?
    - Answer: It is important to ensure proper decoupling and filtering of the power supply to minimize noise interference. Additionally, attention should be given to the maximum voltage rating and operating temperature range specified in the datasheet to avoid damaging the IC.