รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
XC61CC1702MR-G

XC61CC1702MR-G

Product Overview

Category: Integrated Circuits (ICs)

Use: Voltage Regulator

Characteristics: - Low dropout voltage - High output voltage accuracy - Low quiescent current - Thermal shutdown protection - Short circuit current limit

Package: SOT-23-5

Essence: The XC61CC1702MR-G is a voltage regulator IC that provides stable and regulated output voltage for various electronic devices.

Packaging/Quantity: The XC61CC1702MR-G is typically sold in reels of 3000 units.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.0V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 100mA (maximum)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC61CC1702MR-G has a total of five pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. NC: No connection pin
  5. EN: Enable pin

Functional Features

  • Low Dropout Voltage: The XC61CC1702MR-G exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • High Output Voltage Accuracy: This voltage regulator IC provides high output voltage accuracy, ensuring precise and stable voltage regulation for connected devices.
  • Low Quiescent Current: With a low quiescent current, the XC61CC1702MR-G minimizes power consumption when the load is light or idle.
  • Thermal Shutdown Protection: The IC incorporates thermal shutdown protection, which prevents damage due to excessive temperature.
  • Short Circuit Current Limit: The XC61CC1702MR-G has a built-in short circuit current limit feature that protects the device from damage in case of a short circuit.

Advantages and Disadvantages

Advantages: - Stable and regulated output voltage - Low dropout voltage for efficient regulation - High output voltage accuracy - Low quiescent current for reduced power consumption - Thermal shutdown protection for enhanced safety - Short circuit current limit for device protection

Disadvantages: - Limited maximum output current (100mA)

Working Principles

The XC61CC1702MR-G is based on a linear voltage regulator architecture. It uses a reference voltage and feedback mechanism to maintain a stable output voltage regardless of variations in the input voltage or load conditions. The internal circuitry adjusts the pass transistor to regulate the output voltage within the specified range.

Detailed Application Field Plans

The XC61CC1702MR-G can be used in various applications where stable and regulated voltage supply is required. Some potential application fields include: - Battery-powered devices - Portable electronic devices - IoT devices - Consumer electronics - Industrial control systems

Detailed and Complete Alternative Models

  1. XC61CC1702MR-G-ND
  2. XC61CC1702MR-GCT-ND
  3. XC61CC1702MR-GCT-ND
  4. XC61CC1702MR-GCT-ND
  5. XC61CC1702MR-GCT-ND

(Note: This list is not exhaustive and there may be other alternative models available.)

This entry provides an overview of the XC61CC1702MR-G voltage regulator IC, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ XC61CC1702MR-G ในโซลูชันทางเทคนิค

Sure! Here are 10 common questions and answers related to the application of XC61CC1702MR-G in technical solutions:

  1. Question: What is XC61CC1702MR-G?
    - Answer: XC61CC1702MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used for detecting the presence or absence of an input voltage.

  2. Question: What is the operating voltage range of XC61CC1702MR-G?
    - Answer: The operating voltage range of XC61CC1702MR-G is from 0.9V to 6.0V.

  3. Question: What is the output configuration of XC61CC1702MR-G?
    - Answer: XC61CC1702MR-G has an open-drain output configuration, which means it can sink current but cannot source current.

  4. Question: What is the typical quiescent current consumption of XC61CC1702MR-G?
    - Answer: The typical quiescent current consumption of XC61CC1702MR-G is 1.0µA.

  5. Question: Can XC61CC1702MR-G be used for both high and low voltage detection?
    - Answer: Yes, XC61CC1702MR-G can be used for both high and low voltage detection. It has a built-in hysteresis function that allows stable detection of voltage transitions.

  6. Question: What is the response time of XC61CC1702MR-G?
    - Answer: The response time of XC61CC1702MR-G is typically 200µs.

  7. Question: Is XC61CC1702MR-G suitable for battery-powered applications?
    - Answer: Yes, XC61CC1702MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  8. Question: Can XC61CC1702MR-G be used in automotive applications?
    - Answer: Yes, XC61CC1702MR-G is AEC-Q100 qualified and can be used in automotive applications.

  9. Question: What is the temperature range of XC61CC1702MR-G?
    - Answer: The temperature range of XC61CC1702MR-G is from -40°C to +85°C.

  10. Question: Does XC61CC1702MR-G have any built-in protection features?
    - Answer: Yes, XC61CC1702MR-G has built-in overcurrent protection and thermal shutdown protection to ensure safe operation.

Please note that these answers are based on general information about XC61CC1702MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate and detailed information.