รูปภาพอาจเป็นภาพแทน
ดูข้อมูลจำเพาะสำหรับรายละเอียดสินค้า.
VS-2KBP01

VS-2KBP01

Product Overview

Category: Semiconductor
Use: Rectifier diode
Characteristics: High voltage, high current capability
Package: TO-220AB
Essence: Silicon rectifier diode
Packaging/Quantity: Bulk packaging, 100 pieces per pack

Specifications

  • Voltage Rating: 2000V
  • Average Forward Current: 2A
  • Peak Forward Surge Current: 50A
  • Maximum Forward Voltage Drop: 1.7V
  • Reverse Leakage Current: 10μA
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The VS-2KBP01 has a standard TO-220AB package with three pins: 1. Anode (A) 2. Cathode (K) 3. Heat sink tab

Functional Features

  • High voltage capability
  • Fast reverse recovery time
  • Low forward voltage drop
  • High surge current capability

Advantages and Disadvantages

Advantages: - Suitable for high voltage applications - Fast switching speed - Low power loss

Disadvantages: - Relatively large package size - Higher cost compared to standard diodes

Working Principles

The VS-2KBP01 is designed to allow current to flow in only one direction, from the anode to the cathode, when a sufficient forward voltage is applied. It blocks the flow of current in the reverse direction, making it suitable for rectification and power supply applications.

Detailed Application Field Plans

The VS-2KBP01 is commonly used in: - Power supplies - Motor drives - Welding equipment - Battery chargers - Inverters

Detailed and Complete Alternative Models

  • VS-2KBP02: Higher voltage rating (3000V)
  • VS-2KBP03: Higher average forward current (3A)
  • VS-4KBP01: Higher voltage and current capability

This comprehensive entry provides detailed information about the VS-2KBP01 rectifier diode, including its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

แสดงรายการคำถามและคำตอบทั่วไป 10 ข้อที่เกี่ยวข้องกับการใช้ VS-2KBP01 ในโซลูชันทางเทคนิค

Sure, here are 10 common questions and answers related to the application of VS-2KBP01 in technical solutions:

  1. What is VS-2KBP01?

    • VS-2KBP01 is a high voltage bridge rectifier module designed for use in various power supply and industrial applications.
  2. What is the maximum voltage rating of VS-2KBP01?

    • The maximum voltage rating of VS-2KBP01 is typically around 2000 volts.
  3. What is the maximum current rating of VS-2KBP01?

    • The maximum current rating of VS-2KBP01 is typically around 2 amps.
  4. What are the typical applications of VS-2KBP01?

    • VS-2KBP01 is commonly used in AC to DC conversion circuits, motor drives, power supplies, and other industrial applications requiring high voltage rectification.
  5. What is the operating temperature range of VS-2KBP01?

    • The operating temperature range of VS-2KBP01 is typically between -40°C to 150°C.
  6. Does VS-2KBP01 require a heat sink for operation?

    • Yes, due to its high voltage and current capabilities, VS-2KBP01 often requires a heat sink for efficient heat dissipation.
  7. Is VS-2KBP01 suitable for high-frequency applications?

    • No, VS-2KBP01 is not typically recommended for high-frequency applications due to its inherent limitations in switching speed.
  8. Can VS-2KBP01 be used in parallel or series configurations?

    • Yes, VS-2KBP01 can be used in parallel or series configurations to achieve higher current or voltage ratings, respectively.
  9. What are the key safety considerations when using VS-2KBP01?

    • Users should ensure proper insulation, grounding, and protection against overvoltage and overcurrent conditions when using VS-2KBP01.
  10. Are there any specific mounting or installation requirements for VS-2KBP01?

    • VS-2KBP01 should be mounted on a suitable substrate with proper insulation and mechanical support to ensure reliable operation in technical solutions.