SIP43102DLP-T1-E3

Product Overview

• Category: Integrated Circuit
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: SIP (Single In-line Package)
• Essence: Power Supply Controller
• Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

• Input Voltage Range: 4.5V to 60V
• Output Voltage Range: 0.8V to 55V
• Output Current: Up to 2A
• Switching Frequency: 500kHz
• Operating Temperature Range: -40°C to +125°C
• Protection Features: Overvoltage, Overcurrent, Overtemperature

Detailed Pin Configuration

The SIP43102DLP-T1-E3 has the following pin configuration:

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. COMP: Compensation Pin
6. SS: Soft-Start Pin
7. PG: Power Good Indicator
8. VOUT: Output Voltage

Functional Features

• Wide input voltage range allows for versatile applications
• High efficiency ensures minimal power loss
• Low power consumption in standby mode
• Protection features safeguard against voltage and current fluctuations
• Soft-start feature prevents excessive inrush current during startup
• Power good indicator provides visual feedback on output status

Advantages

• Compact SIP package saves board space
• Wide operating temperature range enables usage in various environments
• High switching frequency improves transient response
• Excellent line and load regulation for stable output voltage
• Robust protection features enhance system reliability

Disadvantages

• Limited output current may not be suitable for high-power applications
• Requires external components for proper operation
• Higher cost compared to non-integrated solutions

Working Principles

The SIP43102DLP-T1-E3 is a power supply controller that regulates the output voltage based on the feedback received from the FB pin. It utilizes a high-frequency switching technique to efficiently convert the input voltage to the desired output voltage. The compensation pin (COMP) allows for fine-tuning of the control loop, ensuring stable and accurate voltage regulation. The soft-start pin (SS) gradually ramps up the output voltage during startup to prevent excessive inrush current.

Detailed Application Field Plans

The SIP43102DLP-T1-E3 is widely used in various applications, including:

1. Industrial Automation: Powering sensors, actuators, and control systems.
2. Telecommunications: Providing stable power to network equipment and communication devices.
3. Automotive Electronics: Regulating voltage for automotive infotainment systems and advanced driver-assistance systems (ADAS).
4. Consumer Electronics: Power management for smartphones, tablets, and other portable devices.
5. Renewable Energy: Controlling power flow in solar panels and wind turbines.

Detailed and Complete Alternative Models

1. SIP43101DLP-T1-E3: Similar specifications but with a lower output current capability.
2. SIP43103DLP-T1-E3: Similar specifications but with a higher output current capability.
3. SIP43104DLP-T1-E3: Similar specifications but with additional protection features.

Note: Please refer to the manufacturer's datasheet for a comprehensive list of alternative models.

---

Word count: 345 words